[#noissue] Remove deprecated TCP configuration

agent-module/agent/src/main/resources/pinpoint-root.config

@@ -209,70 +209,10 @@ profiler.logdir.maxbackupsize=5
 # Additional package name for agent classloader
 profiler.agent.classloader.additional-libs=
 
-###########################################################
-# Base Tcp Sender                                        #
-###########################################################
-# Allow TCP data command.
-profiler.tcpdatasender.command.accept.enable=true
-profiler.tcpdatasender.command.activethread.enable=true
-profiler.tcpdatasender.command.activethread.count.enable=true
-profiler.tcpdatasender.command.activethread.threaddump.enable=true
-profiler.tcpdatasender.command.activethread.threadlightdump.enable=true
-
-profiler.tcpdatasender.client.write.timeout=3000
-profiler.tcpdatasender.client.request.timeout=3000
-profiler.tcpdatasender.client.reconnect.interval=3000
-profiler.tcpdatasender.client.ping.interval=300000
-profiler.tcpdatasender.client.handshake.interval=60000
-
-profiler.tcpdatasender.client.write.buffer.highwatermark=32m
-profiler.tcpdatasender.client.write.buffer.lowwatermark=16m
-
 # Interval to retry sending agent info. Unit is milliseconds.
 profiler.agentInfo.send.retry.interval=300000
 
 
-###########################################################
-# Stat Data Sender                                        #
-###########################################################
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.statdatasender.transport.type=UDP
-
-# These settings are active only when using UDP.
-# Capacity of the StatDataSender write queue.
-profiler.statdatasender.write.queue.size=5120
-#profiler.statdatasender.socket.sendbuffersize=1048576
-#profiler.statdatasender.socket.timeout=3000
-profiler.statdatasender.chunk.size=16384
-profiler.statdatasender.socket.type=OIO
-
-# These settings are active only when using TCP.
-profiler.statdatasender.write.buffer.highwatermark=16m
-profiler.statdatasender.write.buffer.lowwatermark=8m
-
-
-###########################################################
-# Span Data Sender                                        #
-###########################################################
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.spandatasender.transport.type=UDP
-
-# These settings are active only when using UDP.
-# Capacity of the SpanDataSender write queue.
-profiler.spandatasender.write.queue.size=5120
-#profiler.spandatasender.socket.sendbuffersize=1048576
-#profiler.spandatasender.socket.timeout=3000
-profiler.spandatasender.chunk.size=16384
-profiler.spandatasender.socket.type=OIO
-
-# These settings are active only when using TCP.
-profiler.spandatasender.write.buffer.highwatermark=16m
-profiler.spandatasender.write.buffer.lowwatermark=8m
-
 #profiler.pinpoint.base-package=com/navercorp/pinpoint/
 #profiler.pinpoint.exclude-package=web/,sdk/
 

agent-module/agent/src/main/resources/profiles/local/pinpoint.config

@@ -109,71 +109,9 @@ profiler.io.buffering.enable=true
 # How many spans to store if buffering enabled.
 profiler.io.buffering.buffersize=20
 
-###########################################################
-# Base Tcp Sender                                        #
-###########################################################
-# Allow TCP data command.
-profiler.tcpdatasender.command.accept.enable=true
-profiler.tcpdatasender.command.activethread.enable=true
-profiler.tcpdatasender.command.activethread.count.enable=true
-profiler.tcpdatasender.command.activethread.threaddump.enable=true
-profiler.tcpdatasender.command.activethread.threadlightdump.enable=true
-
-profiler.tcpdatasender.client.write.timeout=3000
-profiler.tcpdatasender.client.request.timeout=3000
-profiler.tcpdatasender.client.reconnect.interval=3000
-profiler.tcpdatasender.client.ping.interval=300000
-profiler.tcpdatasender.client.handshake.interval=60000
-
-profiler.tcpdatasender.client.write.buffer.highwatermark=32m
-profiler.tcpdatasender.client.write.buffer.lowwatermark=16m
-
 # Interval to retry sending agent info. Unit is milliseconds.
 profiler.agentInfo.send.retry.interval=300000
 
-
-###########################################################
-# Stat Data Sender                                        #
-###########################################################
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.statdatasender.transport.type=UDP
-
-# These settings are active only when using UDP.
-# Capacity of the StatDataSender write queue.
-profiler.statdatasender.write.queue.size=5120
-#profiler.statdatasender.socket.sendbuffersize=1048576
-#profiler.statdatasender.socket.timeout=3000
-profiler.statdatasender.chunk.size=16384
-profiler.statdatasender.socket.type=OIO
-
-# These settings are active only when using TCP.
-profiler.statdatasender.write.buffer.highwatermark=16m
-profiler.statdatasender.write.buffer.lowwatermark=8m
-
-
-###########################################################
-# Span Data Sender                                        #
-###########################################################
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.spandatasender.transport.type=UDP
-
-# These settings are active only when using UDP.
-# Capacity of the SpanDataSender write queue.
-profiler.spandatasender.write.queue.size=5120
-#profiler.spandatasender.socket.sendbuffersize=1048576
-#profiler.spandatasender.socket.timeout=3000
-profiler.spandatasender.chunk.size=16384
-profiler.spandatasender.socket.type=OIO
-
-# These settings are active only when using TCP.
-profiler.spandatasender.write.buffer.highwatermark=16m
-profiler.spandatasender.write.buffer.lowwatermark=8m
-
-
 # Trace Agent active thread info.
 profiler.pinpoint.activethread=true
 

agent-module/agent/src/main/resources/profiles/release/pinpoint.config

@@ -108,71 +108,9 @@ profiler.io.buffering.enable=true
 # How many spans to store if buffering enabled.
 profiler.io.buffering.buffersize=20
 
-###########################################################
-# Base Tcp Sender                                        #
-###########################################################
-# Allow TCP data command.
-profiler.tcpdatasender.command.accept.enable=true
-profiler.tcpdatasender.command.activethread.enable=true
-profiler.tcpdatasender.command.activethread.count.enable=true
-profiler.tcpdatasender.command.activethread.threaddump.enable=true
-profiler.tcpdatasender.command.activethread.threadlightdump.enable=true
-
-profiler.tcpdatasender.client.write.timeout=3000
-profiler.tcpdatasender.client.request.timeout=3000
-profiler.tcpdatasender.client.reconnect.interval=3000
-profiler.tcpdatasender.client.ping.interval=300000
-profiler.tcpdatasender.client.handshake.interval=60000
-
-profiler.tcpdatasender.client.write.buffer.highwatermark=32m
-profiler.tcpdatasender.client.write.buffer.lowwatermark=16m
-
 # Interval to retry sending agent info. Unit is milliseconds.
 profiler.agentInfo.send.retry.interval=300000
 
-
-###########################################################
-# Stat Data Sender                                        #
-###########################################################
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.statdatasender.transport.type=UDP
-
-# These settings are active only when using UDP.
-# Capacity of the StatDataSender write queue.
-profiler.statdatasender.write.queue.size=5120
-#profiler.statdatasender.socket.sendbuffersize=1048576
-#profiler.statdatasender.socket.timeout=3000
-profiler.statdatasender.chunk.size=16384
-profiler.statdatasender.socket.type=OIO
-
-# These settings are active only when using TCP.
-profiler.statdatasender.write.buffer.highwatermark=16m
-profiler.statdatasender.write.buffer.lowwatermark=8m
-
-
-###########################################################
-# Span Data Sender                                        #
-###########################################################
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.spandatasender.transport.type=UDP
-
-# These settings are active only when using UDP.
-# Capacity of the SpanDataSender write queue.
-profiler.spandatasender.write.queue.size=5120
-#profiler.spandatasender.socket.sendbuffersize=1048576
-#profiler.spandatasender.socket.timeout=3000
-profiler.spandatasender.chunk.size=16384
-profiler.spandatasender.socket.type=OIO
-
-# These settings are active only when using TCP.
-profiler.spandatasender.write.buffer.highwatermark=16m
-profiler.spandatasender.write.buffer.lowwatermark=8m
-
-
 # Trace Agent active thread info.
 profiler.pinpoint.activethread=true
 

agent-module/plugins-it/activemq-it/activemq-5-15-it/src/test/resources/activemq/client/pinpoint-activemq-client.config

@@ -27,32 +27,9 @@ profiler.io.buffering.enable=true
 # How many spans to store if buffering enabled.
 profiler.io.buffering.buffersize=20
 
-# Capacity of the SpanDataSender write queue.
-profiler.spandatasender.write.queue.size=5120
-#profiler.spandatasender.socket.sendbuffersize=1048576
-#profiler.spandatasender.socket.timeout=3000
-profiler.spandatasender.chunk.size=16384
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.spandatasender.transport.type=UDP
-
-# Capacity of the StatDataSender write queue.
-profiler.statdatasender.write.queue.size=5120
-#profiler.statdatasender.socket.sendbuffersize=1048576
-#profiler.statdatasender.socket.timeout=3000
-profiler.statdatasender.chunk.size=16384
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.statdatasender.transport.type=UDP
-
 # Interval to retry sending agent info. Unit is milliseconds.
 profiler.agentInfo.send.retry.interval=300000
 
-# Allow TCP data command.
-profiler.tcpdatasender.command.accept.enable=true
-
 # Trace Agent active thread info.
 profiler.pinpoint.activethread=true
 

agent-module/plugins-it/activemq-it/activemq-5-17-it/src/test/resources/activemq/client/pinpoint-activemq-client.config

@@ -27,32 +27,9 @@ profiler.io.buffering.enable=true
 # How many spans to store if buffering enabled.
 profiler.io.buffering.buffersize=20
 
-# Capacity of the SpanDataSender write queue.
-profiler.spandatasender.write.queue.size=5120
-#profiler.spandatasender.socket.sendbuffersize=1048576
-#profiler.spandatasender.socket.timeout=3000
-profiler.spandatasender.chunk.size=16384
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.spandatasender.transport.type=UDP
-
-# Capacity of the StatDataSender write queue.
-profiler.statdatasender.write.queue.size=5120
-#profiler.statdatasender.socket.sendbuffersize=1048576
-#profiler.statdatasender.socket.timeout=3000
-profiler.statdatasender.chunk.size=16384
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.statdatasender.transport.type=UDP
-
 # Interval to retry sending agent info. Unit is milliseconds.
 profiler.agentInfo.send.retry.interval=300000
 
-# Allow TCP data command.
-profiler.tcpdatasender.command.accept.enable=true
-
 # Trace Agent active thread info.
 profiler.pinpoint.activethread=true
 

agent-module/plugins-it/clickhouse-jdbc-it/src/test/resources/pinpoint-clickhouse.config

@@ -34,22 +34,8 @@ profiler.io.buffering.enable=true
 
 profiler.io.buffering.buffersize=20
 
-
-
-profiler.spandatasender.write.queue.size=5120
-#profiler.spandatasender.socket.sendbuffersize=1048576
-#profiler.spandatasender.socket.timeout=3000
-profiler.spandatasender.chunk.size=16384
-
-profiler.statdatasender.write.queue.size=5120
-#profiler.statdatasender.socket.sendbuffersize=1048576
-#profiler.statdatasender.socket.timeout=3000
-profiler.statdatasender.chunk.size=16384
-
 profiler.agentInfo.send.retry.interval=300000
 
-profiler.tcpdatasender.command.accept.enable=true
-
 ###########################################################
 # application type                                        #
 ###########################################################

agent-module/plugins-it/cxf-it/cxf-3-0-it/src/test/resources/cxf/pinpoint-cxf-test.config

@@ -43,44 +43,9 @@ profiler.io.buffering.enable=true
 # How many spans to store if buffering enabled.
 profiler.io.buffering.buffersize=20
 
-# Capacity of the SpanDataSender write queue.
-profiler.spandatasender.write.queue.size=5120
-#profiler.spandatasender.socket.sendbuffersize=1048576
-#profiler.spandatasender.socket.timeout=3000
-profiler.spandatasender.chunk.size=16384
-profiler.spandatasender.socket.type=OIO
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.spandatasender.transport.type=UDP
-
-# Capacity of the StatDataSender write queue.
-profiler.statdatasender.write.queue.size=5120
-#profiler.statdatasender.socket.sendbuffersize=1048576
-#profiler.statdatasender.socket.timeout=3000
-profiler.statdatasender.chunk.size=16384
-profiler.statdatasender.socket.type=OIO
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.statdatasender.transport.type=UDP
-
 # Interval to retry sending agent info. Unit is milliseconds.
 profiler.agentInfo.send.retry.interval=300000
 
-# Allow TCP data command.
-profiler.tcpdatasender.command.accept.enable=true
-profiler.tcpdatasender.command.activethread.enable=true
-profiler.tcpdatasender.command.activethread.count.enable=true
-profiler.tcpdatasender.command.activethread.threaddump.enable=true
-profiler.tcpdatasender.command.activethread.threadlightdump.enable=true
-
-profiler.tcpdatasender.client.write.timeout=3000
-profiler.tcpdatasender.client.request.timeout=3000
-profiler.tcpdatasender.client.reconnect.interval=3000
-profiler.tcpdatasender.client.ping.interval=300000
-profiler.tcpdatasender.client.handshake.interval=60000
-
 # Trace Agent active thread info.
 profiler.pinpoint.activethread=true
 

agent-module/plugins-it/cxf-it/cxf-3-6-it/src/test/resources/cxf/pinpoint-cxf-test.config

@@ -43,44 +43,9 @@ profiler.io.buffering.enable=true
 # How many spans to store if buffering enabled.
 profiler.io.buffering.buffersize=20
 
-# Capacity of the SpanDataSender write queue.
-profiler.spandatasender.write.queue.size=5120
-#profiler.spandatasender.socket.sendbuffersize=1048576
-#profiler.spandatasender.socket.timeout=3000
-profiler.spandatasender.chunk.size=16384
-profiler.spandatasender.socket.type=OIO
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.spandatasender.transport.type=UDP
-
-# Capacity of the StatDataSender write queue.
-profiler.statdatasender.write.queue.size=5120
-#profiler.statdatasender.socket.sendbuffersize=1048576
-#profiler.statdatasender.socket.timeout=3000
-profiler.statdatasender.chunk.size=16384
-profiler.statdatasender.socket.type=OIO
-# Should keep in mind
-# 1. Loadbancing : TCP transport load balancing is per connection.(UDP transport loadbalancing is per packet)
-# 2. In unexpected situations, UDP has its own protection feature (like packet loss etc.), but tcp does not have such a feature. (We will add protection later)
-profiler.statdatasender.transport.type=UDP
-
 # Interval to retry sending agent info. Unit is milliseconds.
 profiler.agentInfo.send.retry.interval=300000
 
-# Allow TCP data command.
-profiler.tcpdatasender.command.accept.enable=true
-profiler.tcpdatasender.command.activethread.enable=true
-profiler.tcpdatasender.command.activethread.count.enable=true
-profiler.tcpdatasender.command.activethread.threaddump.enable=true
-profiler.tcpdatasender.command.activethread.threadlightdump.enable=true
-
-profiler.tcpdatasender.client.write.timeout=3000
-profiler.tcpdatasender.client.request.timeout=3000
-profiler.tcpdatasender.client.reconnect.interval=3000
-profiler.tcpdatasender.client.ping.interval=300000
-profiler.tcpdatasender.client.handshake.interval=60000
-
 # Trace Agent active thread info.
 profiler.pinpoint.activethread=true