Add hardware configuration for genXnoise devices (#768)

hwconfig/customize.sh

@@ -29,5 +29,17 @@ for file in *.override; do
         fi
     fi
 
+    # Configure genxnoise_desktop_module as USB gadget (as intended by the manufacturer)
+    case "$file" in
+      *genxnoise_desktop_module*)
+        echo "" >> "$name_of_ini_file"
+        echo "# CAUTION: To prevent hardware damage, DO NOT use the port labeled 'PWR'" >> "$name_of_ini_file"
+        echo "# (the microUSB port near the edge of the device) when USBGadget is set to 1!" >> "$name_of_ini_file"
+        echo "# You need to disable USBGadget if you would like to use that port!" >> "$name_of_ini_file"
+        echo "# See https://github.com/probonopd/MiniDexed/wiki/Hardware#usb-gadget-mode for more information" >> "$name_of_ini_file"
+        echo "USBGadget=1" >> "$name_of_ini_file"
+        ;;
+    esac
+
     echo "Created $name_of_ini_file"
 done

hwconfig/dxeus_machina_eurorack.override

@@ -0,0 +1,44 @@
+# genXnoise dXeus machina
+# https://www.genxnoise.com/product-page/dxeus-machina-minidexed-eurorack-format
+
+SoundDevice=i2s
+SampleRate=48000
+DACI2CAddress=0
+ChannelsSwapped=0
+
+MIDIThru=ttyS1,ttyS1
+
+LCDEnabled=1
+LCDPinEnable=17
+LCDPinRegisterSelect=4
+LCDPinReadWrite=0
+LCDPinData4=22
+LCDPinData5=23
+LCDPinData6=24
+LCDPinData7=25
+LCDI2CAddress=0x00
+
+SSD1306LCDI2CAddress=0x3c
+SSD1306LCDWidth=128
+SSD1306LCDHeight=32
+SSD1306LCDRotate=0
+SSD1306LCDMirror=0
+
+LCDColumns=20
+LCDRows=2
+
+ButtonPinPrev=0
+ButtonActionPrev=
+ButtonPinNext=0
+ButtonActionNext=
+ButtonPinBack=11
+ButtonActionBack=longpress
+ButtonPinSelect=11
+ButtonActionSelect=click
+ButtonPinHome=11
+ButtonActionHome=doubleclick
+ButtonPinShortcut=11
+
+EncoderEnabled=1
+EncoderPinClock=9
+EncoderPinData=10

hwconfig/genxnoise_desktop_module.override

@@ -0,0 +1,31 @@
+# genXnoise desktop module
+# https://www.genxnoise.com/product-page/minidexed-midi-tone-module
+
+SoundDevice=i2s
+DACI2CAddress=0
+ChannelsSwapped=0
+
+LCDEnabled=1
+LCDPinEnable=17
+LCDPinRegisterSelect=4
+LCDPinReadWrite=0
+LCDPinData4=22
+LCDPinData5=23
+LCDPinData6=24
+LCDPinData7=25
+LCDI2CAddress=0x00
+
+SSD1306LCDI2CAddress=0x3c
+SSD1306LCDWidth=128
+SSD1306LCDHeight=32
+SSD1306LCDRotate=0
+SSD1306LCDMirror=0
+
+LCDColumns=20
+LCDRows=2
+
+EncoderEnabled=1
+EncoderPinClock=10
+EncoderPinData=9
+
+USBGadget=1