dGPU SR-IOV support for virtio-GPU #18
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
iViggyPrabhu
force-pushed
the
main
branch
2 times, most recently
from
90339be to
4c19e9e
Compare
sysopenci
added
Valid commit message
Pending Developer Approval
sysopenci
requested review from
feijiang1,
gkdeepa,
JeevakaPrabu,
kaushlen,
sgnanase,
shyjumon-n,
xyzhao2018 and
xzhan34
Tile-4 is supported by Intel DG2. Support it could benefit performance. Tracked-On: OAM-123143 Signed-off-by: HeYue <[email protected]>
...which allows setting attach->peer2peer without implementing dynamic importer_ops. Tracked-On: OAM-123143 Signed-off-by: Weifeng Liu <[email protected]>
TODO: We must always use DMA addresses for the following two reasons: 1. By design we are not allowed to access the struct page backing a scatter list, especially when config DMABUF_DEBUG is turned on in which case the addresses will be mangled by the core. 2. DMA addresses are required for dGPU local memory sharing between host and guest. Tracked-On: OAM-123143 Signed-off-by: Weifeng Liu <[email protected]>
This feature is mainly for dGPU local memory sharing between host and guest. Presence of this capability means that the virtio-GPU backend is expecting local memory buffers for scan-out. Tracked-On: OAM-123143 Signed-off-by: Weifeng Liu <[email protected]>
Set allow_peer2peer flag when capability VIRTIO_GPU_F_ALLOW_P2P is exposed by the device back-end. This allows other devices to share memory residing in device local memory. Tracked-On: OAM-123143 Signed-off-by: Weifeng Liu <[email protected]>
Tracked-On: OAM-123143 Signed-off-by: Weifeng Liu <[email protected]>
xyzhao2018
pushed a commit
to xyzhao2018/linux-intel-lts2022
that referenced
this pull request
Aug 9, 2024
[ Upstream commit f8bbc07ac535593139c875ffa19af924b1084540 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 projectceladon#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 projectceladon#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e projectceladon#3 [fffffe00003fced0] do_nmi at ffffffff8922660d projectceladon#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 projectceladon#5 [ffffa655314979e8] io_serial_in at ffffffff89792594 projectceladon#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 projectceladon#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 projectceladon#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 projectceladon#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 projectceladon#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 projectceladon#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 projectceladon#12 [ffffa65531497b68] printk at ffffffff89318306 projectceladon#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 projectceladon#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] projectceladon#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] projectceladon#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] projectceladon#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] projectceladon#18 [ffffa65531497f10] kthread at ffffffff892d2e72 projectceladon#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>
Merged
|
Program name for this pr is not compatable with other dependent prs, for more details please check tracked_on |
simonami99
pushed a commit
that referenced
this pull request
Sep 18, 2024
commit be346c1a6eeb49d8fda827d2a9522124c2f72f36 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
simonami99
pushed a commit
that referenced
this pull request
Sep 18, 2024
[ Upstream commit f0c18025693707ec344a70b6887f7450bf4c826b ] When running BPF selftests (./test_progs -t sockmap_basic) on a Loongarch platform, the following kernel panic occurs: [...] Oops[#1]: CPU: 22 PID: 2824 Comm: test_progs Tainted: G OE 6.10.0-rc2+ #18 Hardware name: LOONGSON Dabieshan/Loongson-TC542F0, BIOS Loongson-UDK2018 ... ... ra: 90000000048bf6c0 sk_msg_recvmsg+0x120/0x560 ERA: 9000000004162774 copy_page_to_iter+0x74/0x1c0 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 0000000c (PPLV0 +PIE +PWE) EUEN: 00000007 (+FPE +SXE +ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) BADV: 0000000000000040 PRID: 0014c011 (Loongson-64bit, Loongson-3C5000) Modules linked in: bpf_testmod(OE) xt_CHECKSUM xt_MASQUERADE xt_conntrack Process test_progs (pid: 2824, threadinfo=0000000000863a31, task=...) Stack : ... Call Trace: [<9000000004162774>] copy_page_to_iter+0x74/0x1c0 [<90000000048bf6c0>] sk_msg_recvmsg+0x120/0x560 [<90000000049f2b90>] tcp_bpf_recvmsg_parser+0x170/0x4e0 [<90000000049aae34>] inet_recvmsg+0x54/0x100 [<900000000481ad5c>] sock_recvmsg+0x7c/0xe0 [<900000000481e1a8>] __sys_recvfrom+0x108/0x1c0 [<900000000481e27c>] sys_recvfrom+0x1c/0x40 [<9000000004c076ec>] do_syscall+0x8c/0xc0 [<9000000003731da4>] handle_syscall+0xc4/0x160 Code: ... ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Fatal exception Kernel relocated by 0x3510000 .text @ 0x9000000003710000 .data @ 0x9000000004d70000 .bss @ 0x9000000006469400 ---[ end Kernel panic - not syncing: Fatal exception ]--- [...] This crash happens every time when running sockmap_skb_verdict_shutdown subtest in sockmap_basic. This crash is because a NULL pointer is passed to page_address() in the sk_msg_recvmsg(). Due to the different implementations depending on the architecture, page_address(NULL) will trigger a panic on Loongarch platform but not on x86 platform. So this bug was hidden on x86 platform for a while, but now it is exposed on Loongarch platform. The root cause is that a zero length skb (skb->len == 0) was put on the queue. This zero length skb is a TCP FIN packet, which was sent by shutdown(), invoked in test_sockmap_skb_verdict_shutdown(): shutdown(p1, SHUT_WR); In this case, in sk_psock_skb_ingress_enqueue(), num_sge is zero, and no page is put to this sge (see sg_set_page in sg_set_page), but this empty sge is queued into ingress_msg list. And in sk_msg_recvmsg(), this empty sge is used, and a NULL page is got by sg_page(sge). Pass this NULL page to copy_page_to_iter(), which passes it to kmap_local_page() and to page_address(), then kernel panics. To solve this, we should skip this zero length skb. So in sk_msg_recvmsg(), if copy is zero, that means it's a zero length skb, skip invoking copy_page_to_iter(). We are using the EFAULT return triggered by copy_page_to_iter to check for is_fin in tcp_bpf.c. Fixes: 604326b ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by: John Fastabend <[email protected]> Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/e3a16eacdc6740658ee02a33489b1b9d4912f378.1719992715.git.tanggeliang@kylinos.cn Signed-off-by: Sasha Levin <[email protected]>
simonami99
pushed a commit
that referenced
this pull request
Sep 30, 2024
In binder_add_freeze_work() we iterate over the proc->nodes with the proc->inner_lock held. However, this lock is temporarily dropped to acquire the node->lock first (lock nesting order). This can race with binder_deferred_release() which removes the nodes from the proc->nodes rbtree and adds them into binder_dead_nodes list. This leads to a broken iteration in binder_add_freeze_work() as rb_next() will use data from binder_dead_nodes, triggering an out-of-bounds access: ================================================================== BUG: KASAN: global-out-of-bounds in rb_next+0xfc/0x124 Read of size 8 at addr ffffcb84285f7170 by task freeze/660 CPU: 8 UID: 0 PID: 660 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #18 Hardware name: linux,dummy-virt (DT) Call trace: rb_next+0xfc/0x124 binder_add_freeze_work+0x344/0x534 binder_ioctl+0x1e70/0x25ac __arm64_sys_ioctl+0x124/0x190 The buggy address belongs to the variable: binder_dead_nodes+0x10/0x40 [...] ================================================================== This is possible because proc->nodes (rbtree) and binder_dead_nodes (list) share entries in binder_node through a union: struct binder_node { [...] union { struct rb_node rb_node; struct hlist_node dead_node; }; Fix the race by checking that the proc is still alive. If not, simply break out of the iteration. Fixes: d579b04a52a1 ("binder: frozen notification") Cc: [email protected] Signed-off-by: Carlos Llamas <[email protected]> Bug: 366003708 Link: https://lore.kernel.org/all/[email protected]/ Change-Id: I5ec9d49277a23b864862665b52213460750c535e Signed-off-by: Carlos Llamas <[email protected]>
simonami99
pushed a commit
that referenced
this pull request
Nov 6, 2024
[ Upstream commit c145eea2f75ff7949392aebecf7ef0a81c1f6c14 ]
mwifiex_get_priv_by_id() returns the priv pointer corresponding to
the bss_num and bss_type, but without checking if the priv is actually
currently in use.
Unused priv pointers do not have a wiphy attached to them which can
lead to NULL pointer dereferences further down the callstack. Fix
this by returning only used priv pointers which have priv->bss_mode
set to something else than NL80211_IFTYPE_UNSPECIFIED.
Said NULL pointer dereference happened when an Accesspoint was started
with wpa_supplicant -i mlan0 with this config:
network={
ssid="somessid"
mode=2
frequency=2412
key_mgmt=WPA-PSK WPA-PSK-SHA256
proto=RSN
group=CCMP
pairwise=CCMP
psk="12345678"
}
When waiting for the AP to be established, interrupting wpa_supplicant
with <ctrl-c> and starting it again this happens:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000140
| Mem abort info:
| ESR = 0x0000000096000004
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x04: level 0 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
| CM = 0, WnR = 0, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| user pgtable: 4k pages, 48-bit VAs, pgdp=0000000046d96000
| [0000000000000140] pgd=0000000000000000, p4d=0000000000000000
| Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
| Modules linked in: caam_jr caamhash_desc spidev caamalg_desc crypto_engine authenc libdes mwifiex_sdio
+mwifiex crct10dif_ce cdc_acm onboard_usb_hub fsl_imx8_ddr_perf imx8m_ddrc rtc_ds1307 lm75 rtc_snvs
+imx_sdma caam imx8mm_thermal spi_imx error imx_cpufreq_dt fuse ip_tables x_tables ipv6
| CPU: 0 PID: 8 Comm: kworker/0:1 Not tainted 6.9.0-00007-g937242013fce-dirty #18
| Hardware name: somemachine (DT)
| Workqueue: events sdio_irq_work
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : mwifiex_get_cfp+0xd8/0x15c [mwifiex]
| lr : mwifiex_get_cfp+0x34/0x15c [mwifiex]
| sp : ffff8000818b3a70
| x29: ffff8000818b3a70 x28: ffff000006bfd8a5 x27: 0000000000000004
| x26: 000000000000002c x25: 0000000000001511 x24: 0000000002e86bc9
| x23: ffff000006bfd996 x22: 0000000000000004 x21: ffff000007bec000
| x20: 000000000000002c x19: 0000000000000000 x18: 0000000000000000
| x17: 000000040044ffff x16: 00500072b5503510 x15: ccc283740681e517
| x14: 0201000101006d15 x13: 0000000002e8ff43 x12: 002c01000000ffb1
| x11: 0100000000000000 x10: 02e8ff43002c0100 x9 : 0000ffb100100157
| x8 : ffff000003d20000 x7 : 00000000000002f1 x6 : 00000000ffffe124
| x5 : 0000000000000001 x4 : 0000000000000003 x3 : 0000000000000000
| x2 : 0000000000000000 x1 : 0001000000011001 x0 : 0000000000000000
| Call trace:
| mwifiex_get_cfp+0xd8/0x15c [mwifiex]
| mwifiex_parse_single_response_buf+0x1d0/0x504 [mwifiex]
| mwifiex_handle_event_ext_scan_report+0x19c/0x2f8 [mwifiex]
| mwifiex_process_sta_event+0x298/0xf0c [mwifiex]
| mwifiex_process_event+0x110/0x238 [mwifiex]
| mwifiex_main_process+0x428/0xa44 [mwifiex]
| mwifiex_sdio_interrupt+0x64/0x12c [mwifiex_sdio]
| process_sdio_pending_irqs+0x64/0x1b8
| sdio_irq_work+0x4c/0x7c
| process_one_work+0x148/0x2a0
| worker_thread+0x2fc/0x40c
| kthread+0x110/0x114
| ret_from_fork+0x10/0x20
| Code: a94153f3 a8c37bfd d50323bf d65f03c0 (f940a000)
| ---[ end trace 0000000000000000 ]---
Signed-off-by: Sascha Hauer <[email protected]>
Acked-by: Brian Norris <[email protected]>
Reviewed-by: Francesco Dolcini <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
simonami99
pushed a commit
that referenced
this pull request
Dec 16, 2024
commit 373b9338c9722a368925d83bc622c596896b328e upstream.
Uprobe needs to fetch args into a percpu buffer, and then copy to ring
buffer to avoid non-atomic context problem.
Sometimes user-space strings, arrays can be very large, but the size of
percpu buffer is only page size. And store_trace_args() won't check
whether these data exceeds a single page or not, caused out-of-bounds
memory access.
It could be reproduced by following steps:
1. build kernel with CONFIG_KASAN enabled
2. save follow program as test.c
```
\#include <stdio.h>
\#include <stdlib.h>
\#include <string.h>
// If string length large than MAX_STRING_SIZE, the fetch_store_strlen()
// will return 0, cause __get_data_size() return shorter size, and
// store_trace_args() will not trigger out-of-bounds access.
// So make string length less than 4096.
\#define STRLEN 4093
void generate_string(char *str, int n)
{
int i;
for (i = 0; i < n; ++i)
{
char c = i % 26 + 'a';
str[i] = c;
}
str[n-1] = '\0';
}
void print_string(char *str)
{
printf("%s\n", str);
}
int main()
{
char tmp[STRLEN];
generate_string(tmp, STRLEN);
print_string(tmp);
return 0;
}
```
3. compile program
`gcc -o test test.c`
4. get the offset of `print_string()`
```
objdump -t test | grep -w print_string
0000000000401199 g F .text 000000000000001b print_string
```
5. configure uprobe with offset 0x1199
```
off=0x1199
cd /sys/kernel/debug/tracing/
echo "p /root/test:${off} arg1=+0(%di):ustring arg2=\$comm arg3=+0(%di):ustring"
> uprobe_events
echo 1 > events/uprobes/enable
echo 1 > tracing_on
```
6. run `test`, and kasan will report error.
==================================================================
BUG: KASAN: use-after-free in strncpy_from_user+0x1d6/0x1f0
Write of size 8 at addr ffff88812311c004 by task test/499CPU: 0 UID: 0 PID: 499 Comm: test Not tainted 6.12.0-rc3+ #18
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x27/0x310
kasan_report+0x10f/0x120
? strncpy_from_user+0x1d6/0x1f0
strncpy_from_user+0x1d6/0x1f0
? rmqueue.constprop.0+0x70d/0x2ad0
process_fetch_insn+0xb26/0x1470
? __pfx_process_fetch_insn+0x10/0x10
? _raw_spin_lock+0x85/0xe0
? __pfx__raw_spin_lock+0x10/0x10
? __pte_offset_map+0x1f/0x2d0
? unwind_next_frame+0xc5f/0x1f80
? arch_stack_walk+0x68/0xf0
? is_bpf_text_address+0x23/0x30
? kernel_text_address.part.0+0xbb/0xd0
? __kernel_text_address+0x66/0xb0
? unwind_get_return_address+0x5e/0xa0
? __pfx_stack_trace_consume_entry+0x10/0x10
? arch_stack_walk+0xa2/0xf0
? _raw_spin_lock_irqsave+0x8b/0xf0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? depot_alloc_stack+0x4c/0x1f0
? _raw_spin_unlock_irqrestore+0xe/0x30
? stack_depot_save_flags+0x35d/0x4f0
? kasan_save_stack+0x34/0x50
? kasan_save_stack+0x24/0x50
? mutex_lock+0x91/0xe0
? __pfx_mutex_lock+0x10/0x10
prepare_uprobe_buffer.part.0+0x2cd/0x500
uprobe_dispatcher+0x2c3/0x6a0
? __pfx_uprobe_dispatcher+0x10/0x10
? __kasan_slab_alloc+0x4d/0x90
handler_chain+0xdd/0x3e0
handle_swbp+0x26e/0x3d0
? __pfx_handle_swbp+0x10/0x10
? uprobe_pre_sstep_notifier+0x151/0x1b0
irqentry_exit_to_user_mode+0xe2/0x1b0
asm_exc_int3+0x39/0x40
RIP: 0033:0x401199
Code: 01 c2 0f b6 45 fb 88 02 83 45 fc 01 8b 45 fc 3b 45 e4 7c b7 8b 45 e4 48 98 48 8d 50 ff 48 8b 45 e8 48 01 d0 ce
RSP: 002b:00007ffdf00576a8 EFLAGS: 00000206
RAX: 00007ffdf00576b0 RBX: 0000000000000000 RCX: 0000000000000ff2
RDX: 0000000000000ffc RSI: 0000000000000ffd RDI: 00007ffdf00576b0
RBP: 00007ffdf00586b0 R08: 00007feb2f9c0d20 R09: 00007feb2f9c0d20
R10: 0000000000000001 R11: 0000000000000202 R12: 0000000000401040
R13: 00007ffdf0058780 R14: 0000000000000000 R15: 0000000000000000
</TASK>
This commit enforces the buffer's maxlen less than a page-size to avoid
store_trace_args() out-of-memory access.
Link: https://lore.kernel.org/all/[email protected]/
Fixes: dcad1a2 ("tracing/uprobes: Fetch args before reserving a ring buffer")
Signed-off-by: Qiao Ma <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
Signed-off-by: Vamsi Krishna Brahmajosyula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.