AirScape Whole House Fan

A Home Assistant custom component to integrate Airscape Whole House Fans with Gen2 controls.

Installation via HACS (recommended)

1. Follow the link here
2. Use the custom repo link https://github.com/quielb/hass-airscape
3. Select the category type integration
4. Then once it's there (still in HACS) click the INSTALL button
5. Restart Home Assistant
6. Once restarted, in the HA UI go to Configuration (the ⚙️ in the lower left) -> Devices and Services click + Add Integration and search for airscape

Using the Airscape component

The basic component operation of the component implements all the features of the fan component. This integration extends the basic fan adding additional functionality specific to an Airscape whole house fan.

Services

The Airscape component has several custom services that are controlled by the minimum speed configuration option:

Service	Description
airscape.turn_on_to_minimum	Starts the fan and sets the speed to the minimum defined configuration option
airscape.speed_up	Increase the fan speed by one step
airscape.slow_down	Slow down the fan speed by one step. Will not go below the defined minimum fan speed configuration option

Controls

In addition to the standard fan controls there is one addition button. When used, the button will add one hour to the timer.

Sensors

The Airscape component adds several sensors to represent the data from the fan:

Sensor	Description
Attic Temperature	Readings from Attic temp sensor
CFM	Current CFM of fan
Power	Power usage in Watts
Timer Remaining	Number of minutes remaining on shutoff timer
Inside	Reading from control panel wall plate (disabled by default)
Outside	Readings from deprecated outdoor data collection kit (disabled by default)
Door	Binary sensor to indicate if fan doors are in motion (disabled by default)