fix: e52c: revision of some formatting errors

Signed-off-by: Mitchell Ma <[email protected]>

docs/e/e52c/faq.md

@@ -11,5 +11,5 @@ sidebar_position: 7
   <img src="/img/e/e52c/radxa-e52c-hardware-overview.webp" width="800" alt="radxa-e52c pack" />
 
 :::tip
-另外不要一开机就按照 USER 按键，此时系统会进入安全模式，这种模式下只能通过串口进行操作。
+不要一开机就按照 USER 按键，此时系统会进入安全模式，这种模式下只能通过串口进行操作。
 :::

docs/e/e52c/getting-started/power-supply.md

@@ -6,7 +6,7 @@ sidebar_position: 7
 
 Radxa E52C 支持各种电源，固定电压为 5V 输入，电流建议 2A 或者以上，我们测试过的适配器有如下型号:
 
-- 推荐使用官方 [瑞莎 PD 30W 适配器](/accessories/pd_30w)
+- [瑞莎 PD 30W 适配器](/accessories/pd_30w) (推荐使用)
 - 苹果适配器 20W
 - Anker适配器 65W
 - 小米适配器 65W

i18n/en/docusaurus-plugin-content-docs/current/common/general/_etcherV2.mdx

@@ -60,4 +60,4 @@ sudo dpkg -i balena-etcher_1.18.11_amd64.deb
      fallback="rock5a"
    />
 
-**If there is an error in flashing, please try again. **
+**If there is an error in flashing, please try again.**

i18n/en/docusaurus-plugin-content-docs/current/e/e52c/faq.md

@@ -6,10 +6,10 @@ sidebar_position: 7
 
 1. How to restore factory settings of iStoreOS system?
 
-When the system is running normally, press and hold the USER button for 5s, the system will restore the factory settings and then reboot.
+   When the system is running normally, press and hold the USER button for 5s, the system will restore the factory settings and then reboot.
 
   <img src="/img/e/e52c/radxa-e52c-hardware-overview.webp" width="800" alt="radxa-e52c pack" />
 
 :::tip
-In addition, do not press the USER button as soon as you power on E52C, as this will put the system into safe mode, which can only be operated through the serial port.
+Do not press the USER button as soon as you power on E52C, as this will put the system into safe mode, which can only be operated through the serial port.
 :::

i18n/en/docusaurus-plugin-content-docs/current/e/e52c/getting-started/introduction.md

@@ -6,13 +6,7 @@ sidebar_position: 1
 
 ## Key Features
 
-The Radxa E52C is a compact network computer that offers a wide range of networking ca‑
-pabilities and powerful computing performance. The Radxa E52C is based on the Rockchip
-RK3582 processor, featuring dual‑core Cortex‑A76 and quad‑core Cortex‑A55 CPUs, deliv‑
-ering exceptional performance and efficiency. With dual onboard 2.5G Ethernet interfaces,
-it ensures high‑speed network connectivity, suitable for high‑bandwidth network applica‑
-tions. The Radxa E52C provides developers, IoT enthusiasts, DIY PC enthusiasts, and other
-users with a reliable and highly capable platform to turn their ideas into reality.
+The Radxa E52C is a compact network computer that offers a wide range of networking capabilities and powerful computing performance. The Radxa E52C is based on the Rockchip RK3582 processor, featuring dualcore Cortex‑A76 and quad‑core Cortex‑A55 CPUs, delivering exceptional performance and efficiency. With dual onboard 2.5G Ethernet interfaces, it ensures high‑speed network connectivity, suitable for high‑bandwidth network applications. The Radxa E52C provides developers, IoT enthusiasts, DIY PC enthusiasts, and other users with a reliable and highly capable platform to turn their ideas into reality.
 
 ## Motherboard Preview
 
@@ -79,7 +73,7 @@ users with a reliable and highly capable platform to turn their ideas into reali
     </tr>
      <tr>
         <td align="center">Casing</td>
-        <td colspan="1" align="center">72mm x 72mm x 28.7mm Optional aluminium alloy casing</td>
+        <td colspan="1" align="center">72mm x 72mm x 28.7mm aluminium alloy casing (Optional)</td>
     </tr>
 </table>
 

i18n/en/docusaurus-plugin-content-docs/current/e/e52c/getting-started/power-supply.md

@@ -6,7 +6,7 @@ sidebar_position: 7
 
 The Radxa E52C supports a variety of power supplies with a fixed voltage of 5V / 3A, the power supply we tested are:
 
-- Recommended to use official [Radxa PD 30W Adapter](/accessories/pd_30w)
+- [Radxa PD 30W Adapter](/accessories/pd_30w) (Recommended to use)
 - Apple Adapter 20W
 - Anker Adapter 65W
 - Xiaomi Adapter 65W

i18n/en/docusaurus-plugin-content-docs/current/e/e52c/getting-started/quick-start.md

@@ -57,7 +57,7 @@ The default username of the iStoreOS background is root, and the password is pas
 
 ### Login Via Serial port
 
-1. 将 USB TYPE-A 转 TYPE-C 数据线的 TYPE-A 口接电脑，TYPE-C 口接 Radxa E52C 调试口，波特率设置为1500000
+1. Connect the TYPE-A port of the USB TYPE-A to TYPE-C cable to the computer and the TYPE-C port to the Radxa E52C debug port, and set the baud rate to 1500000.
 
 <img src="/img/e/e52c/radxa-e52c-serial-login1.webp" width="500" alt="radxa-e52c pack" />
 
@@ -71,11 +71,11 @@ The default username of the iStoreOS background is root, and the password is pas
 
 4. If you are on windows system, make sure the CH340 driver is installed on your computer.
 
-Connect the TYPE-A port of the USB TYPE-A to TYPE-C cable to the computer, and the TYPE-C port to the Radxa E52C debug port, and check whether there is a CH340 driver in the device manager of the computer.
+   Connect the TYPE-A port of the USB TYPE-A to TYPE-C cable to the computer, and the TYPE-C port to the Radxa E52C debug port, and check whether there is a CH340 driver in the device manager of the computer.
 
-<img src="/img/e/e52c/radxa-e52c-ch340-install.webp" width="500" alt="radxa-e52c pack" />
-
-You can see the USB-SERIAL CH340 in the picture above, it means there is a driver, if not, please install the [CH340 driver](https://www.wch.cn/download/CH341SER_EXE.html).
+   <img src="/img/e/e52c/radxa-e52c-ch340-install.webp" width="500" alt="radxa-e52c pack" />
+    
+   You can see the USB-SERIAL CH340 in the picture above, it means there is a driver, if not, please install the [CH340 driver](https://www.wch.cn/download/CH341SER_EXE.html).
 
 5. Use the serial port tool
 
@@ -220,21 +220,21 @@ Picocom is a serial port utility that can be used on a Mac and supports multiple
 
 <img src="/img/e/e52c/radxa-e52c-power2.webp" width="500" alt="radxa-e52c pack" />
 
-4.Use Angryip to find IP
+4. Use Angryip to find IP
 
-This method can be used to find IP address when you can't directly operate the motherboard to get no screen or remote IP address.
+   This method can be used to find IP address when you can't directly operate the motherboard to get no screen or remote IP address.
 
-The default ip address of the iStoreOS system is 192.168.100.1.
+   The default ip address of the iStoreOS system is 192.168.100.1.
 
-If the user has changed it himself, he can use the Angryip tool to look it up.
+   If the user has changed it himself, he can use the Angryip tool to look it up.
 
-    - First of all, the host needs to download [Angryip](https://angryip.org/download/), and then make sure the host and motherboard are in the same LAN.
+   - First of all, the host needs to download [Angryip](https://angryip.org/download/), and then make sure the host and motherboard are in the same LAN.
 
-    - Open Angryip, select the IP range 192.168.2.0 - 192.168.2.255 (select the network segment where the host computer and motherboard are located), click Start, as shown in the figure.
+   - Open Angryip, select the IP range 192.168.2.0 - 192.168.2.255 (select the network segment where the host computer and motherboard are located), click Start, as shown in the figure.
 
-    - ![Angryip](/img/configuration/ssh-Angryip.webp)
+   - ![Angryip](/img/configuration/ssh-Angryip.webp)
 
-    - Ctrl + F Look for the `e52c` keyword to find the IP address of the motherboard.
+   - Ctrl + F Look for the `e52c` keyword to find the IP address of the motherboard.
 
 5. Connecting to Radxa E52C via SSH