fix: wrong order of pics in the power of board from 40 pin en docs

i18n/en/docusaurus-plugin-content-docs/current/common/general/_power_board_from_40pin.mdx

@@ -16,13 +16,14 @@ The power supply must be a stable 5V output, if the power supply fluctuates more
 
 - Find 5V and GND in 40 PIN GPIO (you can find the infomation at **Hardware Info** Part of the product's docs)
 
-  <img src="/img//rock5b/rock5bp_40pin_power_2.webp" alt="rock 40 pin power" width="700" />
+  <img src="/img//rock5b/rock5bp_40pin_power_3.webp" alt="rock 40 pin" width="300" />
 
 - Use DuPont cables to connect the positive and negative terminals of the power supply, 2 to the positive terminal and 2 to the negative terminal.
 - Adjust the power supply voltage to 5V, then power on the board.
 - Connect the positive end of the DuPont cable to the 5V input PIN of the 40 PIN, and the negative end of the DuPont cable to the GND of the 40 PIN.
-  <img src="/img//rock5b/rock5bp_40pin_power_3.webp" alt="rock 40 pin" width="300" />
+
   <img src="/img//rock5b/rock5bp_40pin_power_1.webp" alt="rock 40 pin power" width="700" />
+  <img src="/img//rock5b/rock5bp_40pin_power_2.webp" alt="rock 40 pin power" width="700" />
 
 ## Frequently Asked Questions