Merge pull request #807 from berndfinger/issue-752-fixes-for-molecule

Fixes for testing with molecule

roles/sap_general_preconfigure/handlers/main.yml

@@ -43,6 +43,7 @@
 - name: Remount /dev/shm # noqa command-instead-of-module no-changed-when
   ansible.builtin.command: mount -o remount /dev/shm
   listen: __sap_general_preconfigure_mount_tmpfs_handler
+  tags: molecule-idempotence-notest
 
 - name: Check if /dev/shm is available
   ansible.builtin.command: df -h /dev/shm

roles/sap_general_preconfigure/tasks/RedHat/generic/configure-kernel-parameters.yml

@@ -13,11 +13,25 @@
   loop_control:
     loop_var: line_item
 
+# Note: The sole purpose of the following two tasks is to collect the current value(s) of the kernel parameters
+# in sap_general_preconfigure_etc_sysctl_sap_conf so that the "Reload kernel parameters from file ..." task
+# can correctly report its 'changed' state. See also https://github.com/sap-linuxlab/community.sap_install/issues/752 .
+- name: Construct the command for getting all current parameters of file '{{ sap_general_preconfigure_etc_sysctl_sap_conf }}'
+  ansible.builtin.command: awk 'BEGIN{FS="="; printf ("sysctl ")}{printf ("%s ", $1)}' "{{ sap_general_preconfigure_etc_sysctl_sap_conf }}"
+  register: __sap_general_preconfigure_register_sap_conf_sysctl_command
+  changed_when: false
+
+# Reason for noqa: The command module tries to run the complete string as a single command
+- name: Get all currently active values of the parameters of file '{{ sap_general_preconfigure_etc_sysctl_sap_conf }}' # noqa command-instead-of-shell
+  ansible.builtin.shell: "{{ __sap_general_preconfigure_register_sap_conf_sysctl_command.stdout }}"
+  register: __sap_general_preconfigure_register_sap_conf_sysctl_p_output_old
+  changed_when: false
+
 - name: Reload kernel parameters from file '{{ sap_general_preconfigure_etc_sysctl_sap_conf }}'
   ansible.builtin.command: sysctl -p "{{ sap_general_preconfigure_etc_sysctl_sap_conf }}"
-  register: __sap_general_preconfigure_register_sap_conf_sysctl_p_output
-  changed_when: true
+  register: __sap_general_preconfigure_register_sap_conf_sysctl_p_output_new
+  changed_when: __sap_general_preconfigure_register_sap_conf_sysctl_p_output_old.stdout != __sap_general_preconfigure_register_sap_conf_sysctl_p_output_new.stdout
 
 - name: Display kernel parameters after setting kernel.pid_max
   ansible.builtin.debug:
-    var: __sap_general_preconfigure_register_sap_conf_sysctl_p_output.stdout_lines
+    var: __sap_general_preconfigure_register_sap_conf_sysctl_p_output_new.stdout_lines

roles/sap_general_preconfigure/tasks/RedHat/installation.yml

@@ -74,6 +74,7 @@
 # and then having to compare the output against the list of desired repos
     - name: Run the subscription-manager command # noqa no-changed-when
       ansible.builtin.command: "{{ __sap_general_preconfigure_fact_subscription_manager_command }}"
+      tags: molecule-idempotence-notest
 
 # Reason for noqa: We need the output of the yum command
     - name: Get list of enabled repositories
@@ -104,6 +105,7 @@
   when:
     - sap_general_preconfigure_set_minor_release
     - __sap_general_preconfigure_register_subscription_manager_release.stdout != ansible_distribution_version
+  tags: molecule-idempotence-notest
 
 - name: Ensure that the required package groups are installed, RHEL except 8.1
   ansible.builtin.package:
@@ -120,6 +122,7 @@
   ansible.builtin.command: "yum install {{ sap_general_preconfigure_packagegroups | join(' ') }} --nobest --exclude=kernel* -y"
   register: __sap_general_preconfigure_register_yum_group_install
   when: ansible_distribution_version == '8.1'
+  tags: molecule-idempotence-notest
 
 # possible replacement once we no longer need Ansible 2.9 compatibility:
 #- name: Ensure that the required package groups are installed, RHEL 8 and 9

roles/sap_hana_preconfigure/tasks/RedHat/installation.yml

@@ -42,6 +42,7 @@
     - name: Enable required repositories # noqa no-changed-when
       ansible.builtin.command: "subscription-manager repos {{ __sap_hana_preconfigure_fact_required_repos_args | map('quote') | join(' ') }}"
       register: __sap_hana_preconfigure_register_subscription_enable_repos
+      tags: molecule-idempotence-notest
 
     - name: Display the output of the subscription-manager repos --enable command
       ansible.builtin.debug:

roles/sap_hana_preconfigure/tasks/sapnote/2055470.yml

@@ -66,11 +66,25 @@
       loop_control:
         loop_var: line_item
 
-# Reason for noqa: We unconditionally reload the kernel parameters without first checking the current values
-    - name: Reload kernel parameters from file '/etc/sysctl.d/ibm_largesend.conf' # noqa no-changed-when
+# Note: The sole purpose of the following two tasks is to collect the current value(s) of the kernel parameters
+# in '/etc/sysctl.d/ibm_largesend.conf' so that the "Reload kernel parameters from file ..." task
+# can correctly report its 'changed' state. See also https://github.com/sap-linuxlab/community.sap_install/issues/752 .
+    - name: Construct the command for getting all current parameters of file '/etc/sysctl.d/ibm_largesend.conf'
+      ansible.builtin.command: awk 'BEGIN{FS="="; printf ("sysctl ")}{printf ("%s ", $1)}' /etc/sysctl.d/ibm_largesend.conf
+      register: __sap_hana_preconfigure_register_ibm_largesend_sysctl_command
+      changed_when: false
+
+# Reason for noqa: The command module tries to run the complete string as a single command
+    - name: Get all currently active values of the parameters of file '/etc/sysctl.d/ibm_largesend.conf' # noqa command-instead-of-shell
+      ansible.builtin.shell: "{{ __sap_hana_preconfigure_register_ibm_largesend_sysctl_command.stdout }}"
+      register: __sap_hana_preconfigure_register_ibm_largesend_sysctl_p_output_old
+      changed_when: false
+
+    - name: Reload kernel parameters from file '/etc/sysctl.d/ibm_largesend.conf'
       ansible.builtin.command: sysctl -p /etc/sysctl.d/ibm_largesend.conf
-      register: __sap_hana_preconfigure_register_ibm_largesend_sysctl_p_output
+      register: __sap_hana_preconfigure_register_ibm_largesend_sysctl_p_output_new
+      changed_when: __sap_hana_preconfigure_register_ibm_largesend_sysctl_p_output_old.stdout != __sap_hana_preconfigure_register_ibm_largesend_sysctl_p_output_new.stdout
 
     - name: Display largesend kernel parameters
       ansible.builtin.debug:
-        var: __sap_hana_preconfigure_register_ibm_largesend_sysctl_p_output.stdout_lines
+        var: __sap_hana_preconfigure_register_ibm_largesend_sysctl_p_output_new.stdout_lines

roles/sap_hana_preconfigure/tasks/sapnote/2382421.yml

@@ -11,7 +11,7 @@
   when: sap_hana_preconfigure_config_all | d(true) or sap_hana_preconfigure_2382421 | d(false)
   block:
 
-    - name: Modify entries in file '{{ __sap_hana_preconfigure_etc_sysctl_saphana_conf }}'
+    - name: Ensure correct entries in file '{{ __sap_hana_preconfigure_etc_sysctl_saphana_conf }}'
       ansible.builtin.lineinfile:
         path: "{{ __sap_hana_preconfigure_etc_sysctl_saphana_conf }}"
         create: yes
@@ -67,11 +67,24 @@
             line: "net.core.rmem_max={{ __sap_hana_preconfigure_register_sysctl_ipv4_tcp_rmem.stdout.split()[-1] }}"
             state: present
 
-# Reason for noqa: We unconditionally reload the kernel parameters without first checking the current values
-    - name: Reload kernel parameters from file '{{ __sap_hana_preconfigure_etc_sysctl_saphana_conf }}' # noqa no-changed-when
+# Note: The sole purpose of the following two tasks is to collect the current value(s) of the kernel parameters
+# in __sap_hana_preconfigure_etc_sysctl_saphana_conf so that the "Reload kernel parameters from file ..." task
+# can correctly report its 'changed' state. See also https://github.com/sap-linuxlab/community.sap_install/issues/752 .
+    - name: Construct the command for getting all current parameters of file '{{ __sap_hana_preconfigure_etc_sysctl_saphana_conf }}'
+      ansible.builtin.command: awk 'BEGIN{FS="="; printf ("sysctl ")}{printf ("%s ", $1)}' "{{ __sap_hana_preconfigure_etc_sysctl_saphana_conf }}"
+      register: __sap_hana_preconfigure_register_saphana_conf_sysctl_command
+      changed_when: false
+
+    - name: Get all currently active values of the parameters of file '{{ __sap_hana_preconfigure_etc_sysctl_saphana_conf }}'
+      ansible.builtin.command: "{{ __sap_hana_preconfigure_register_saphana_conf_sysctl_command.stdout }}"
+      register: __sap_hana_preconfigure_register_saphana_conf_sysctl_p_output_old
+      changed_when: false
+
+    - name: Reload kernel parameters from file '{{ __sap_hana_preconfigure_etc_sysctl_saphana_conf }}'
       ansible.builtin.command: sysctl -p "{{ __sap_hana_preconfigure_etc_sysctl_saphana_conf }}"
-      register: __sap_hana_preconfigure_register_saphana_conf_sysctl_p_output
+      register: __sap_hana_preconfigure_register_saphana_conf_sysctl_p_output_new
+      changed_when: __sap_hana_preconfigure_register_saphana_conf_sysctl_p_output_old.stdout != __sap_hana_preconfigure_register_saphana_conf_sysctl_p_output_new.stdout
 
     - name: Display kernel parameters for network tuning
       ansible.builtin.debug:
-        var: __sap_hana_preconfigure_register_saphana_conf_sysctl_p_output.stdout_lines
+        var: __sap_hana_preconfigure_register_saphana_conf_sysctl_p_output_new.stdout_lines

roles/sap_hana_preconfigure/tasks/sapnote/3024346.yml

@@ -13,7 +13,7 @@
     - sap_hana_preconfigure_config_all|d(true) or sap_hana_preconfigure_3024346|d(false)
   block:
 
-    - name: Modify entries in file '{{ __sap_hana_preconfigure_etc_sysctl_netapp_hana_conf }}'
+    - name: Ensure correct entries in file '{{ __sap_hana_preconfigure_etc_sysctl_netapp_hana_conf }}'
       ansible.builtin.lineinfile:
         path: "{{ __sap_hana_preconfigure_etc_sysctl_netapp_hana_conf }}"
         create: yes
@@ -25,14 +25,30 @@
       loop_control:
         loop_var: line_item
 
-# Reason for noqa: We unconditionally reload the kernel parameters without first checking the current values
-    - name: Reload kernel parameters from file '{{ __sap_hana_preconfigure_etc_sysctl_netapp_hana_conf }}' # noqa no-changed-when
+# Note: The sole purpose of the following two tasks is to collect the current value(s) of the kernel parameters
+# in __sap_hana_preconfigure_etc_sysctl_netapp_hana_conf so that the "Reload kernel parameters from file ..." task
+# can correctly report its 'changed' state. See also https://github.com/sap-linuxlab/community.sap_install/issues/752 .
+    - name: Construct the command for getting all current parameters of file '{{ __sap_hana_preconfigure_etc_sysctl_netapp_hana_conf }}'
+      ansible.builtin.command: awk 'BEGIN{FS="="; printf ("sysctl ")}{printf ("%s ", $1)}' "{{ __sap_hana_preconfigure_etc_sysctl_netapp_hana_conf }}"
+      register: __sap_hana_preconfigure_register_netapp_sysctl_command
+      changed_when: false
+
+# Reason for noqa - risky-shell-pipe: when adding 'set -o pipefail', the complete string is attempted to be executed as a single command.
+#   Also the command after the pipe is not expected to fail.
+# Reason for noqa - no-tabs: This is a false positive in ansible-lint 6.22.2, removed in 24.5.0. See https://github.com/ansible/ansible-lint/issues/4020
+    - name: Get all currently active values of the parameters of file '{{ __sap_hana_preconfigure_etc_sysctl_netapp_hana_conf }}' # noqa risky-shell-pipe no-tabs
+      ansible.builtin.shell: "{{ __sap_hana_preconfigure_register_netapp_sysctl_command.stdout }} | sed 's,\t, ,g'"
+      register: __sap_hana_preconfigure_register_netapp_sysctl_p_output_old
+      changed_when: false
+
+    - name: Reload kernel parameters from file '{{ __sap_hana_preconfigure_etc_sysctl_netapp_hana_conf }}'
       ansible.builtin.command: sysctl -p "{{ __sap_hana_preconfigure_etc_sysctl_netapp_hana_conf }}"
-      register: __sap_hana_preconfigure_register_netapp_sysctl_p_output
+      register: __sap_hana_preconfigure_register_netapp_sysctl_p_output_new
+      changed_when: __sap_hana_preconfigure_register_netapp_sysctl_p_output_old.stdout != __sap_hana_preconfigure_register_netapp_sysctl_p_output_new.stdout
 
     - name: Display kernel parameters for NetApp NFS
       ansible.builtin.debug:
-        var: __sap_hana_preconfigure_register_netapp_sysctl_p_output.stdout_lines
+        var: __sap_hana_preconfigure_register_netapp_sysctl_p_output_new.stdout_lines
 
     - name: Set kernel tunable for NFSv3 as per SAP note 3024346
       ansible.builtin.lineinfile: