Breeze Linear Algebra

Core Concepts

Compared to other numerical computing environments, Breeze matrices default to column major ordering, like Matlab, but indexing is 0-based, like Numpy. Breeze has as its core concepts matrices and column vectors. Row vectors are normally stored as matrices with a single row. This allows for greater type safety with the downside that conversion of row vectors to column vectors is performed using a transpose-slice (a.t(::,0)) instead of a simple transpose (a.t).

UFuncs are very important in Breeze. Once you get a feel for the syntax (i.e. what's in this section), it might be worthwhile to read the first half of the UFunc page. (You can skip the last half that involves implementing your own UFuncs...until you're ready to contribute to Breeze!)

Quick Reference

The following table assumes that Numpy is used with from numpy import * and Breeze with

import breeze.linalg._
import breeze.numerics._

Creation

Operation	Breeze	Matlab	Numpy
Zeroed matrix	`val c = DenseMatrix.zeros[Double](n,m)`	`c = zeros(n,m)`	`c = zeros((n,m))`
Zeroed vector	`val a = DenseVector.zeros[Double](n)`	`a = zeros(n)`	`a = zeros(n)`
Vector of ones	`val a = DenseVector.ones[Double](n)`	`a = ones(n)`	`a = ones(n)`
Vector of particular number	`val b = DenseVector.fill(n){5.0}`	`a = ones(n) * 5`	`a = ones(n) * 5`
Identity matrix	`DenseMatrix.eye[Double](n)`	`eye(n)`	`eye(n)`
Diagonal matrix	`diag(DenseVector(1.0,2.0,3.0))`	`diag([1 2 3])`	`diag((1,2,3))`
Matrix inline creation	`val a = DenseMatrix((1.0,2.0), (3.0,4.0))`	`a = [1 2; 3 4]`	`a = array([ [1,2], [3,4] ])`
Column vector inline creation	`val a = DenseVector(1,2,3,4)`	`a = [1 2 3 4]`	`a=array([1,2,3,4])`
Row vector inline creation	`val a = DenseVector(1,2,3,4).t`	`a = [1,2,3,4]'`	`a = array([1,2,3]).reshape(-1,1)`

Indexing and Slicing

Operation	Breeze	Matlab	Numpy
Basic Indexing	`a(0,1)`	`a(1,2)`	`a[0,1]`
Extract subset of vector	`a(1 to 4)` or `a(1 until 5)` or `a.slice(1,4)`	`a(2:5)`	`a[1:4]`
(negative steps)	`a(5 to 0 by -1)`	`a(6:-1:1)`	`a[5:0:-1]`
(tail)	`a(1 to -1)`	`a(2:end)`	`a[1:]`
(last element)	`a( -1 )`	`a(end)`	`a[-1]`
Extract column of matrix	`a(::, 2)`	`a(:,3)`	`a[:,2]`

Other Manipulation

Operation	Breeze	Matlab	Numpy
Reshaping	`a.reshape(3, 2)`	`reshape(a, 3, 2)`	`a.reshape(3,2)`
Flatten matrix	`a.toDenseVector` (Makes copy)	`a(:)`	`a.flatten()`
Copy lower triangle	`lowerTriangular(a)`	`tril(a)`	`tril(a)`
Copy upper triangle	`upperTriangular(a)`	`triu(a)`	`triu(a)`
Create view of matrix diagonal	`diag(a)`	NA	`diagonal(a)` (Numpy >= 1.9)
Vector Assignment to subset	`a(1 to 4) := 5.0`	`a(2:5) = 5`	`a[1:4] = 5`
Vector Assignment to subset	`a(1 to 4) := DenseVector(1.0,2.0,3.0)`	`a(2:5) = [1 2 3]`	`a[1:4] = array([1,2,3])`
Matrix Assignment to subset	`a(1 to 3,1 to 3) := 5.0`	`a(2:4,2:4) = 5`	`a[1:3,1:3] = 5`
Matrix Assignment to column	`a(::, 2) := 5.0`	`a(:,3) = 5`	`a[:,2] = 5`
Matrix vertical concatenate	`DenseMatrix.vertcat(a,b)`	`[a ; b]`	`vstack((a,b))`
Matrix horizontal concatenate	`DenseMatrix.horzcat(d,e)`	`[a , b]`	`hstack((a,b))`
Vector concatenate	`DenseVector.vertcat(a,b)`	`[a b]`	`concatenate((a,b))`

Operations

Operation	Breeze	Matlab	Numpy
Elementwise addition	`a + b`	`a + b`	`a + b`
Elementwise multiplication	`a :* b`	`a .* b`	`a * b`
Elementwise exponentiation	`a ^:^ b`	`a .^ b`	`power(a, b)`
Elementwise comparison	`a :< b`	`a < b` (gives matrix of 1/0 instead of true/false)	`a < b`
Elementwise equals	`a :== b`	`a == b` (gives matrix of 1/0 instead of true/false)	`a == b`
Inplace addition	`a :+= 1.0`	`a += 1`	`a += 1`
Inplace elementwise multiplication	`a :*= 2.0`	`a *= 2`	`a *= 2`
Vector dot product	`a dot b`, `a.t * b`^†	`dot(a,b)`	`dot(a,b)`
Elementwise max	`max(a)`	`max(a)`	`a.max()`
Elementwise argmax	`argmax(a)`	`[v i] = max(a); i`	`a.argmax()`

†: new in 0.7-SNAPSHOT

Sum

Operation	Breeze	Matlab	Numpy
Elementwise sum	`sum(a)`	`sum(sum(a))`	`a.sum()`
Sum down each column (giving a row vector)	`sum(a, Axis._0)` or `sum(a(::, *))`	`sum(a)`	`sum(a,0)`
Sum across each row (giving a column vector)	`sum(a, Axis._1)` or `sum(a(*, ::))`	`sum(a')`	`sum(a,1)`
Trace (sum of diagonal elements)	`trace(a)`	`trace(a)`	`a.trace()`
Cumulative sum	`accumulate(a)`	`cumsum(a)`	`a.cumsum()`

Boolean Operators

Operation	Breeze	Matlab	Numpy
Elementwise and	`a :& b`	`a && b`	`a and b`
Elementwise or	`a :	b`	`a
Elementwise not	`!a`	`~a`	`not a`
True if any element is nonzero	`any(a)`	`any(a)`	n/a
True if all elements are nonzero	`all(a)`	`all(a)`	n/a

Linear Algebra Functions

Operation	Breeze	Matlab	Numpy
Linear solve	`a \ b`	`a \ b`	`linalg.solve(a,b)`
Transpose	`a.t`	`a'`	`a.conj.transpose()`
Determinant	`det(a)`	`det(a)`	`linalg.det(a)`
Inverse	`inv(a)`	`inv(a)`	`linalg.inv(a)`
Pseudoinverse	`pinv(a)`	`pinv(a)`	`linalg.pinv(a)`
Norm	`norm(a)`	`norm(a)`	`norm(a)`
Eigenvalues (Symmetric)	`eigSym(a)`	`[v,l] = eig(a)`	`linalg.eig(a)[0]`
Eigenvalues	`val (er, ei, _) = eig(a)` (Separate real & imaginary part)	`eig(a)`	`linalg.eig(a)[0]`
Eigenvectors	`eig(a)._3`	`[v,l] = eig(a)`	`linalg.eig(a)[1]`
Singular values	`val (u,s,v) = svd(a)`	`svd(a)`	`linalg.svd(a)`
Rank	`rank(a)`	`rank(a)`	`rank(a)`
Vector length	`a.length`	`size(a)`	`a.size`
Matrix rows	`a.rows`	`size(a,1)`	`a.shape[0]`
Matrix columns	`a.cols`	`size(a,2)`	`a.shape[1]`

Rounding and Signs

Operation	Breeze	Matlab	Numpy
Round	`round(a)`	`round(a)`	`around(a)`
Ceiling	`ceil(a)`	`ceil(a)`	`ceil(a)`
Floor	`floor(a)`	`floor(a)`	`floor(a)`
Sign	`signum(a)`	`sign(a)`	`sign(a)`
Absolute Value	`abs(a)`	`abs(a)`	`abs(a)`

Constants

Operation	Breeze	Matlab	Numpy
Not a Number	`NaN` or `nan`	`NaN`	`nan`
Infinity	`Inf` or `inf`	`Inf`	`inf`
Pi	`Constants.Pi`	`pi`	`math.pi`
e	`Constants.E`	`exp(1)`	`math.e`

Complex numbers

If you make use of complex numbers, you will want to include a breeze.math._ import. This declares a i variable, and provides implicit conversions from Scala’s basic types to complex types.

Operation	Breeze	Matlab	Numpy
Imaginary unit	`i`	`i`	`z = 1j`
Complex numbers	`3 + 4 * i` or `Complex(3,4)`	`3 + 4i`	`z = 3 + 4j`
Absolute Value	`abs(z)` or `z.abs`	`abs(z)`	`abs(z)`
Real Component	`z.real`	`real(z)`	`z.real`
Imaginary Component	`z.conjugate`	`conj(z)`	`z.conj()` or `z.conjugate()`

Numeric functions

Breeze contains a fairly comprehensive set of special functions under the Breeze.numerics._ import. These functions can be applied to single elements, vectors or matrices of Doubles. This includes versions of the special functions from scala.math that can be applied to vectors and matrices. Any function acting on a basic numeric type can “vectorized”, to a UFunc function, which can act elementwise on vectors and matrices:

val v = DenseVector(1.0,2.0,3.0)
exp(v) // == DenseVector(2.7182818284590455, 7.38905609893065, 20.085536923187668)

UFuncs can also be used in-place on Vectors and Matrices:

val v = DenseVector(1.0,2.0,3.0)
exp.inPlace(v) // == DenseVector(2.7182818284590455, 7.38905609893065, 20.085536923187668)

See UFunc for more information.

Here is a (non-exhaustive) list of UFuncs in Breeze:

Trigonometry

sin, sinh, asin, asinh
cos, cosh, acos, acosh
tan, tanh, atan, atanh
atan2
sinc(x) == sin(x)/x
sincpi(x) == sinc(x * Pi)

Logarithm, Roots, and Exponentials

log, exp log10
log1p, expm1
sqrt, sbrt
pow

Gamma Function and its cousins

The gamma function is the extension of the factorial function to the reals. Numpy needs from scipy.special import * for this and subsequent sections.

Operation	Breeze	Matlab	Numpy
Gamma function	`exp(lgamma(a))`	`gamma(a)`	`gamma(a)`
log Gamma function	`lgamma(a)`	`gammaln(a)`	`gammaln(a)`
Incomplete gamma function	`gammp(a, x)`	`gammainc(a, x)`	`gammainc(a, x)`
Upper incomplete gamma function	`gammq(a, x)`	`gammainc(a, x, tail)`	`gammaincc(a, x)`
derivative of lgamma	`digamma(a)`	`psi(a)`	`polygamma(0, a)`
derivative of digamma	`trigamma(a)`	`psi(1, a)`	`polygamma(1, a)`
nth derivative of digamma	na	`psi(n, a)`	`polygamma(n, a)`
Log Beta function	lbeta(a,b)	`betaln(a, b)`	`betaln(a,b)`
Generalized Log Beta function	lbeta(a)	na	na

Error Function

The error function...

Operation	Breeze	Matlab	Numpy
error function	`erf(a)`	`erf(a)`	`erf(a)`
1 - erf(a)	`erfc(a)`	`erfc(a)`	`erfc(a)`
inverse error function	`erfinv(a)`	`erfinv(a)`	`erfinv(a)`
inverse erfc	`erfcinv(a)`	`erfcinv(a)`	`erfcinv(a)`

Other functions

Operation	Breeze	Matlab	Numpy
logistic sigmoid	`sigmoid(a)`	na	`expit(a)`
Indicator function	`I(a)`	not needed	`where(cond, 1, 0)`

Signal Analysis

Signal analysis functions, including correlate and convolve live in scala.breeze, and are documented in Breeze Signal Processing

Broadcasting

Sometimes we want to apply an operation to every row or column of a matrix, as a unit. For instance, you might want to compute the mean of each row, or add a vector to every column. Adapting a matrix so that operations can be applied columnwise or rowwise is called broadcasting. Languages like R and numpy automatically and implicitly do broadcasting, meaning they won’t stop you if you accidentally add a matrix and a vector. In Breeze, you have to signal your intent using the broadcasting operator *. The * is meant to evoke “foreach” visually. Here are some examples:

    val dm = DenseMatrix((1.0,2.0,3.0),
                         (4.0,5.0,6.0))

    val res = dm(::, *) + DenseVector(3.0, 4.0)
    assert(res === DenseMatrix((4.0, 5.0, 6.0), (8.0, 9.0, 10.0)))

    res(::, *) := DenseVector(3.0, 4.0)
    assert(res === DenseMatrix((3.0, 3.0, 3.0), (4.0, 4.0, 4.0)))

    val m = DenseMatrix((1.0, 3.0), (4.0, 4.0))
    assert(mean(m(*, ::)) === DenseVector(2.0, 4.0))
    assert(mean(m(::, *)) === DenseMatrix((2.5, 3.5)))

Elementwise special functions

Breeze contains a fairly comprehensive set of special functions under the Breeze.numerics._ import. These functions can be applied to single elements, vectors or matrices of Doubles. This includes versions of the special functions from scala.math that can be applied to vectors and matrices. Any function acting on a basic numeric type can “vectorized”, to a UFunc function, which can act elementwise on vectors and matrices:

val v = DenseVector(1.0,2.0,3.0)
exp(v) // == DenseVector(2.7182818284590455, 7.38905609893065, 20.085536923187668)

UFuncs can also be used in-place on Vectors and Matrices:

val v = DenseVector(1.0,2.0,3.0)
exp(v) // == DenseVector(2.7182818284590455, 7.38905609893065, 20.085536923187668)

Some UFuncs are more like “reduction” functions than like “vectorized functions.” For instance, sum computes the sum of the entries in a matrix or vector.

val r = DenseMatrix.rand(5,5)

// sum all elements
sum(r):Double

sum and mean can also operate on the rows or columns of a matrix independently, using broadcasting:

// mean of each row into a single column
mean(r(*, ::))

// sum of each column into a single row
sum(r(::, *))

The UFunc trait is similar to numpy’s concept of ufuncs. See UFunc for more information on Breeze UFuncs.

Casting and type safety

Compared to Numpy and Matlab, Breeze requires you to be more explicit about the types of your variables. When you create a new vector for example, you must specify a type (such as in DenseVector.zeros[Double](n)) in cases where a type can not be inferred automatically. Automatic inference will occur when you create a vector by passing its initial values in (DenseVector). A common mistake is using integers for initialisation (i.e. DenseVector), which would give a matrix of integers instead of doubles. Both Numpy and Matlab would default to doubles instead.

Breeze will not convert integers to doubles for you in most expressions. Simple operations like a :+ 3 when a is a DenseVector[Double] will not compile. Breeze provides a convert function, which can be used to explicitly cast. You can also use v.mapValues(_.toDouble).

Casting

Operation	Breeze	Matlab	Numpy
Convert to Int	`convert(a, Int)`	`int(a)`	`a.astype(int)`

Performance

Breeze uses netlib-java for its core linear algebra routines. This includes all the cubic time operations, matrix-matrix and matrix-vector multiplication. Special efforts are taken to ensure that arrays are not copied.

Netlib-java will attempt to load system optimised BLAS/LAPACK if they are installed, falling back to the reference natives, falling back to pure Java. Set your logger settings to ALL for the com.github.fommil.netlib package to check the status, and to com.github.fommil.jniloader for a more detailed breakdown. Read the netlib-java project page for more details.

Currently vectors and matrices over types other than Double, Float and Int are boxed, and will typically be a lot slower. If you find yourself needing other AnyVal types like Long or Short, please ask on the list about possibly adding support for them.

Breeze is a numerical processing library for Scala. http://www.scalanlp.org

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Breeze Linear Algebra

Breeze Linear Algebra

Core Concepts

Quick Reference

Creation

Indexing and Slicing

Other Manipulation

Operations

Sum

Boolean Operators

Linear Algebra Functions

Rounding and Signs

Constants

Complex numbers

Numeric functions

Trigonometry

Logarithm, Roots, and Exponentials

Gamma Function and its cousins

Error Function

Other functions

Signal Analysis

Broadcasting

Elementwise special functions

Casting and type safety

Casting

Performance

Clone this wiki locally