Timer Programmer toolbar

1. Port - Specify the path to the serial port where the programmable clock module is attached. In Linux-based systems, CH340G USB to USART interface can access using the ttyUSB prefix. (Example: ttyUSB0)

2. Connect - Press this button to connect the Timer Programmer with the attached programmable clock module.

3. Disconnect - Disconnect the serial connection between the Timer Programmer and the programmable clock module.

4. Add new timer - Press this button to add a new timer slot into the timer configuration.

5. Delete selected timer - This button is used to delete the selected timer slot(s).

6. Set system time - The window which opens with this button is helpful to synchronize the clock module's date and time with the PC date and time.

7. Sync / Upload - Press this button to transfer the timer slot configuration into the programmable clock module.

8. Save to file... - Save the current timer slot configuration file to the specified file.

9. Open file... - Press this button to load the timer slot configuration from the existing file.

10. Clear all - This button removes all available timer slots from the configuration profile.

11. About - Show version information related to the Timer Programmer application.