sync

pdp10/docs/sec5-minimalist-walkthrough.md

@@ -1,47 +1,47 @@
-assume you've started simh pdp10 and it's listening on 2010 for connections.
-
-# on raspi side, start kermit
-
-    ./kermit/wermit
-    C-Kermit>set host localhost 2010 /raw-socket
-    C-Kermit>c
-
-# on tops10 side, start kermit
-
-assume you've created a subfolder [,,decwar] in your home folder [,].
-
-    .r setsrc
-    *cp [,,decwar]
-    *^C
-    .r kermit
-    Kermit-10>set file byte-size 36-bit
-    Kermit-10>server
-
-ctrl-\c back over to raspi kermit
-
-# in raspi kermit
-
-    C-Kermit>set transfer mode manual
-    C-Kermit>set file type binary
-    C-Kermit>send utexas/*.*
-    C-Kermit>send compuserve/*.*
-    C-Kermit>send scripts/COM1.CMD
-    C-Kermit>send scripts/COM2.CMD
-    C-Kermit>send scripts/CAN1.CMD
-
-can leave this connection in this state for further usage and get on tops10 via another connection, but if you like to use just this connection
-
-    C-Kermit>c
-    Kermit-10>^c^c^c
-    .
-
-# on tops10 side
-
-    .compile @com1
-    .compile @com2
-    .r link
-    *@can1
-    .get decwar
-    .ssave
-
-if it's not already there, create p,pn [1,27] using react, then copy DECWAR.EXE, DECWAR.GRP, DECWAR.HLP, DECWAR.NWS to its home folder to 'deploy/install' it. [1,27] is where decwar was deployed for compuserve. for utexas it was logical device name 'gam:', assigned to [5,30].
+assume you've started simh pdp10 and it's listening on 2010 for connections.
+
+# on raspi side, start kermit
+
+    ./kermit/wermit
+    C-Kermit>set host localhost 2010 /raw-socket
+    C-Kermit>c
+
+# on tops10 side, start kermit
+
+assume you've created a subfolder [,,decwar] in your home folder [,].
+
+    .r setsrc
+    *cp [,,decwar]
+    *^C
+    .r kermit
+    Kermit-10>set file byte-size 36-bit
+    Kermit-10>server
+
+ctrl-\c back over to raspi kermit
+
+# in raspi kermit
+
+    C-Kermit>set transfer mode manual
+    C-Kermit>set file type binary
+    C-Kermit>send utexas/*.*
+    C-Kermit>send compuserve/*.*
+    C-Kermit>send scripts/COM1.CMD
+    C-Kermit>send scripts/COM2.CMD
+    C-Kermit>send scripts/CAN1.CMD
+
+can leave this connection in this state for further usage and get on tops10 via another connection, but if you like to use just this connection
+
+    C-Kermit>c
+    Kermit-10>^c^c^c
+    .
+
+# on tops10 side
+
+    .compile @com1
+    .compile @com2
+    .r link
+    *@can1
+    .get decwar
+    .ssave
+
+if it's not already there, create p,pn [1,27] using react, then copy DECWAR.EXE, DECWAR.GRP, DECWAR.HLP, DECWAR.NWS to its home folder to 'deploy/install' it. [1,27] is where decwar was deployed for compuserve. for utexas it was logical device name 'gam:', assigned to [5,30].