Merge branch '3.0' of github.com:drwetter/testssl.sh into 3.0

CHANGELOG.md

@@ -6,9 +6,15 @@
 * Full support of TLS 1.3, shows also drafts supported
 * ROBOT check
 * Better TLS extension support
-* Better OpenSSL 1.1.1 support
+* Better OpenSSL 1.1.1 and higher versions support
 * DNS over Proxy and other proxy improvements
 * Decoding of unencrypted BIG IP cookies
+* Initial client certificate support
+* Socket timeouts (``--connect-timeout``)
+* IDN/IDN2 servername support
+* pwnedkeys.com support
+* Initial client certificate support
+* Initial support for certificate compression
 * Better JSON output: renamed IDs and findings shorter/better parsable
 * JSON output now valid also for non-responding servers
 * Testing now per default 370 ciphers
@@ -20,6 +26,7 @@
 * Check for session resumption (Ticket, ID)
 * TLS Robustness check (GREASE)
 * Server preference distinguishes between TLS 1.3 and lower protocols
+* Mark TLS 1.0 and TLS 1.1 as deprecated
 * Does a few startup checks which make later tests easier and faster (determine_optimal_\*() )
 * Expect-CT Header Detection
 * `--phone-out` does certificate revocation checks via OCSP (LDAP+HTTP) and with CRL
@@ -32,11 +39,12 @@
 * Added `--ids-friendly` switch
 * Exit codes better: 0 for running without error, 1+n for small errors, >240 for major errors.
 * Better error msg suppression (not fully installed OpenSSL)
+* Better parsing of HTTP headers & better output of longer HTTP headers
 * Dockerfile and repo @ docker hub with that file (see above)
 * Java Root CA store added
 * Better support for XMPP via STARTTLS & faster
 * Certificate check for to-name in stream of XMPP
-* Support for NNTP via STARTTLS
+* Support for NNTP via STARTTLS, fixes for MySQL and PostgresQL
 * Support for SNI and STARTTLS
 * More robustness for any STARTTLS protocol (fall back to plaintext while in TLS)
 * Major update of client simulations with self-collected data

doc/testssl.1

@@ -1,7 +1,7 @@
 .\" generated with Ronn/v0.7.3
 .\" http://github.com/rtomayko/ronn/tree/0.7.3
 .
-.TH "TESTSSL" "1" "April 2019" "" ""
+.TH "TESTSSL" "1" "December 2019" "" ""
 .
 .SH "NAME"
 \fBtestssl\fR
@@ -122,7 +122,7 @@ Please note that \fBfname\fR has to be in Unix format\. DOS carriage returns won
 \fB\-\-mode <serial|parallel>\fR\. Mass testing to be done serial (default) or parallel (\fB\-\-parallel\fR is shortcut for the latter, \fB\-\-serial\fR is the opposite option)\. Per default mass testing is being run in serial mode, i\.e\. one line after the other is processed and invoked\. The variable \fBMASS_TESTING_MODE\fR can be defined to be either equal \fBserial\fR or \fBparallel\fR\.
 .
 .SS "SPECIAL INVOCATIONS"
-\fB\-t <protocol>, \-\-starttls <protocol>\fR does a default run against a STARTTLS enabled \fBprotocol\fR\. \fBprotocol\fR must be one of \fBftp\fR, \fBsmtp\fR, \fBpop3\fR, \fBimap\fR, \fBxmpp\fR, \fBtelnet\fR, \fBldap\fR, \fBlirc\fR, \fBlmtp\fR, \fBnntp\fR, \fBpostgres\fR, \fBmysql\fR\. For the latter four you need e\.g\. the supplied OpenSSL or OpenSSL version 1\.1\.1\. Please note: MongoDB doesn\'t offer a STARTTLS connection, LDAP currently only works with \fB--ssl-native\fR\. \fBtelnet\fR and \fBirc\fR is WIP\.
+\fB\-t <protocol>, \-\-starttls <protocol>\fR does a default run against a STARTTLS enabled \fBprotocol\fR\. \fBprotocol\fR must be one of \fBftp\fR, \fBsmtp\fR, \fBpop3\fR, \fBimap\fR, \fBxmpp\fR, \fBtelnet\fR, \fBldap\fR, \fBirc\fR, \fBlmtp\fR, \fBnntp\fR, \fBpostgres\fR, \fBmysql\fR\. For the latter four you need e\.g\. the supplied OpenSSL or OpenSSL version 1\.1\.1\. Please note: MongoDB doesn\'t offer a STARTTLS connection, LDAP currently only works with \fB\-\-ssl\-native\fR\. \fBtelnet\fR and \fBirc\fR is WIP\.
 .
 .P
 \fB\-\-xmpphost <jabber_domain>\fR is an additional option for STARTTLS enabled XMPP: It expects the jabber domain as a parameter\. This is only needed if the domain is different from the URI supplied\.
@@ -323,7 +323,7 @@ Security headers (X\-Frame\-Options, X\-XSS\-Protection, Expect\-CT,\.\.\. , CSP
 \fB\-g, \-\-grease\fR checks several server implementation bugs like tolerance to size limitations and GREASE, see https://www\.ietf\.org/archive/id/draft\-ietf\-tls\-grease\-01\.txt \. This checks doesn\'t run per default\.
 .
 .SS "VULNERABILITIES"
-\fB\-U, \-\-vulnerable, \-\-vulnerablilities\fR Just tests all (of the following) vulnerabilities\. The environment variable \fBVULN_THRESHLD\fR determines after which value a separate headline for each vulnerability is being displayed\. Default is \fB1\fR which means if you check for two vulnerabilities, only the general headline for vulnerabilities section is displayed \-\- in addition to the vulnerability and the result\. Otherwise each vulnerability or vulnerability section gets its own headline in addition to the output of the name of the vulnerabilty and test result\. A vulnerability section is comprised of more than one check, e\.g\. the renegotiation vulnerability check has two checks, so has Logjam\.
+\fB\-U, \-\-vulnerable, \-\-vulnerabilities\fR Just tests all (of the following) vulnerabilities\. The environment variable \fBVULN_THRESHLD\fR determines after which value a separate headline for each vulnerability is being displayed\. Default is \fB1\fR which means if you check for two vulnerabilities, only the general headline for vulnerabilities section is displayed \-\- in addition to the vulnerability and the result\. Otherwise each vulnerability or vulnerability section gets its own headline in addition to the output of the name of the vulnerabilty and test result\. A vulnerability section is comprised of more than one check, e\.g\. the renegotiation vulnerability check has two checks, so has Logjam\.
 .
 .P
 \fB\-H, \-\-heartbleed\fR Checks for Heartbleed, a memory leakage in openssl\. Unless the server side doesn\'t support the heartbeat extension it is likely that this check runs into a timeout\. The seconds to wait for a reply can be adjusted with \fBHEARTBLEED_MAX_WAITSOCK\fR\. 8 is the default\.
@@ -377,7 +377,7 @@ Security headers (X\-Frame\-Options, X\-XSS\-Protection, Expect\-CT,\.\.\. , CSP
 \fB\-\-warnings <batch|off|false>\fR The warnings parameter determines how testssl\.sh will deal with situations where user input normally will be necessary\. There are a couple of options here\. \fBbatch\fR doesn\'t wait for a confirming keypress\. This is automatically being chosen for mass testing (\fB\-\-file\fR)\. \fB\-false\fR just skips the warning AND the confirmation\. Please note that there are conflicts where testssl\.sh will still ask for confirmation which are the ones which otherwise would have a drastic impact on the results\. Almost any other decision will be made as a best guess by testssl\.sh\. The same can be achieved by setting the environment variable \fBWARNINGS\fR\.
 .
 .P
-\fB\-\-connect\-timeout <seconds>\fR This is useful for direct TCP connections to a node\. If the node does not complete a TCP handshake (e\.g\. because it is down or behind a firewall) testssl\.sh may hang for ~2 minutes\. This parameter instructs testssl\.sh to wait at most \fBseconds\fR for the handshake to complete. This option only works if your OS has a \fBtimeout\fR binary installed\.
+\fB\-\-connect\-timeout <seconds>\fR This is useful for socket TCP connections to a node\. If the node does not complete a TCP handshake (e\.g\. because it is down or behind a firewall or there\'s an IDS or a tarpit) testssl\.sh may ususally hang for around 2 minutes or even much more\. This parameter instructs testssl\.sh to wait at most \fBseconds\fR for the handshake to complete before giving up\. This option only works if your OS has a timeout binary installed\. CONNECT_TIMEOUT is the corresponding enviroment variable\.
 .
 .P
 \fB\-\-openssl\-timeout <seconds>\fR This is especially useful for all connects using openssl and practically useful for mass testing\. It avoids the openssl connect to hang for ~2 minutes\. The expected parameter \fBseconds\fR instructs testssl\.sh to wait before the openssl connect will be terminated\. The option is only available if your OS has a timeout binary installed\. As there are different implementations of \fBtimeout\fR: It automatically calls the binary with the right parameters\. OPENSSL_TIMEOUT is the equivalent environment variable\.