Ultralightweight battery-powered thermometer using ESP32 and MQTT with home assistant integration.
-
Updated
Dec 11, 2021 - C
Ultralightweight battery-powered thermometer using ESP32 and MQTT with home assistant integration.
Pointless Button Hardware Version 2
Official repository of the S-NODE-1 IoT project, a solar powered environmental sensor. The repository contains firmware, software and HW files of the project.
Ultra-Low Power Single push button ON/OFF controller based on ATTiny13/13A/25/45/85 for other microController and circuits application
Universal Arduino based data logger to SDcard.
Arduino compatible low consumption battery powered device with uSD slot and real time clock
DitroniX GTIE ESP8266 ADC GTIL CH340 OPTO CT Current Clamp Battery Powered Energy Monitor GTIL2
Battery-powered wildlife camera based on the ESP32-CAM board
Time Watcher, Timer, Stopwatch on ESP8266 WeMos with display shield
Firmware for a battery powered Feather M0 LoRaWAN particular matter sensor (BME280, SDS011)
A wireless, battery-powered recording light or "do not disturb" light. The light is controlled with two buttons on a webpage. To save power, the MCU enters deep-sleep after 11 hours, for 13 hours.
Battery powered Orange Pi Zero for Pentesting Wireless Networks
A lightmeter for an analog camera powered by a Infenion XMC2GO board. Features 5 buttons, OLED screen with reading and a VEML7700 light meter IC. Powered with a LIR2032 Li-ion cell.
Experiments with making little earring PCBs with LEDs and a small battery
Sigfox temperature & humidity sensor
Battery-powered Wi-Fi Repeater based on the ESP8266 board, than can be used to extend a Wi-Fi Network range in areas where it could be difficult to use standard Wi-Fi repeaters
Add a description, image, and links to the battery-powered topic page so that developers can more easily learn about it.
To associate your repository with the battery-powered topic, visit your repo's landing page and select "manage topics."