DIY Optical See-Through HMD
OpenThree is an optical see-through AR head-mounted display that can be inexpensively built using commercially available large reflector.
The components required for the build are as follows
| Components | Model | Purchase | Qty |
|---|---|---|---|
| Reflector | unknown | AliExpress | 1 |
| Display&Display driver | ls060r1sx02 | AliExpress | 1 |
| Head strap | unknown | Amazonjp | 1 |
| USB breakout board | unknown | Amazonjp | 1 |
| Insert nut | Sonic Lock SL M3×3 | Monotaro | 4 |
| Bolt(long) | countersunk M3×8 | Monotaro | 2 |
| Bolt(short) | countersunk M3×6 | Monotaro | 2 |
| Screw(long) | FBP-0206EB | Monotaro | 2 |
| Screw(short) | FBP-0204EB | Monotaro | 6 |
| Magnet | φ6×3 | Monotaro | 4 |
- The reflector was adapted from AR goggles for smartphones and its official name is unknown. Please look for something similar in the picture.
- I use 6inch ones instead of 5inch ones. Also, you will need the same conversion board as shown in the picture, so please purchase a set with MIPI drivers.
- The head strap is adapted from a welding one. Use whatever you like.
- The Type A connector is attached to use the VIVE CE cable (power supply for the display). The connection to the display driver board is made with a pin header and cable as shown in the picture.
