Merge pull request SensorsIot#511 from ukkopahis/doc-influx

docs/influxdb: configuring settings, how to fix broken container

docs/Containers/InfluxDB.md

@@ -14,16 +14,53 @@ To connect use:
 | URL (from other services) | http://influxdb:8086   |
 | URL (on the host machine) | http://localhost:8086   |
 
+Open the CLI interactive shell by:
+
+``` console
+$ docker exec -it influxdb influx
+```
+
 ## References
-- [Docker](https://hub.docker.com/_/influxdb)
-- [Website](https://www.influxdata.com/)
+- [InfluxDB documentation](https://docs.influxdata.com/influxdb/v1.8/)
+- [Using the InfluxDB image (Docker Hub)](https://hub.docker.com/_/influxdb)
+
+## Configuration
+
+Most
+[settings](https://docs.influxdata.com/influxdb/v1.8/administration/config) can
+be set using environment variables in `~IOTstack/docker-compose.yml`. These
+will override settings in the configuration file.
+
+For instance, if you plan on having lots of data or tags, to prevent influxdb
+from using up all your RAM for indexes, add:
+```yaml
+    - INFLUXDB_DATA_INDEX_VERSION=tsi1
+```
+
+It's not recommended that you change the `influxdb.conf`-configuration file.
+But if you absolutely need to, you should to export it as a persistent volume
+(otherwise every update/recreate will undo your changes). To do this, edit
+`docker-compose.yml` and under influxdb's `volumes:` add:
+
+```yaml
+    - ./volumes/influxdb/config:/etc/influxdb
+```
+And then recreate the container: `docker-compose up -d influxdb`
 
 ## Setup
 
+To install helper alias `influx` that opens the influx console and displays
+times as human-readable:
+
+``` console
+$ echo "alias iotstack_influx='docker-compose -f ~/IOTstack/docker-compose.yml \
+    exec influxdb influx -precision=rfc3339'" >> ~/.profile
+$ source ~/.profile
+```
+
 To access the influx console, show current databases and database measurements:
 ```
-pi@raspberrypi:~/IOTstack $ docker-compose exec influxdb bash
-root@6bca535a945f:/# influx
+pi@raspberrypi:~ $ iotstack_influx
 Connected to http://localhost:8086 version 1.8.10
 InfluxDB shell version: 1.8.10
 > show databases
@@ -49,6 +86,9 @@ To create a new database and set a limited retention policy, here for instance
 any data older than 52 weeks is deleted:
 
 ```
+$ iotstack_influx
+Connected to http://localhost:8086 version 1.8.10
+InfluxDB shell version: 1.8.10
 > create database mydb
 > show retention policies on mydb
 name    duration shardGroupDuration replicaN default
@@ -79,24 +119,55 @@ on your card. The goal is to avoid writing lots of small changes targeting the
 same physical blocks. Here are some tips to mitigate SD-card wear:
 
 * Don't use short retention policies. This may mask heavy disk IO without
-  increasing disk space usage. Depending on the file system used, new data may
-  be written to the same flash blocks that were freed by expiration, wearing
-  them out.
+  increasing disk space usage. Depending on the flash card and file system
+  used, new data may be re-written to the same blocks that were freed by the
+  expiration, wearing them out.
 * Take care not to add measurements too often. If possible no more often than
-  once a minute. Add all measurements in one operation.
+  once a minute. Add all measurements in one operation. Even a small write
+  will physically write a whole new block and erase the previously used block.
 * Adding measurements directly to Influxdb will cause a write on every
   operation. If your client code can't aggregate multiple measurements into one
   write, consider routing them via Telegraf. It has the
   `flush_interval`-option, which will combine the measurements into one write.
 * All InfluxDB queries are logged by default and logs are written to the
-  SD-card. To disable this, add to docker-compose.yml, next to the other
+  SD-card. To disable this, add into docker-compose.yml, next to the other
   INFLUXDB_\* entries:
-  ```
+  ```yaml
       - INFLUXDB_DATA_QUERY_LOG_ENABLED=false
       - INFLUXDB_HTTP_LOG_ENABLED=false
   ```
   This is especially important if you plan on having Grafana or Chronograf
-  displaying up-to-date data on a dashboard.
+  displaying up-to-date data on a dashboard, making queries all the time.
+
+## Maintanance when container refuses to start
+
+Sometimes you need start the container without starting influxdb to access
+its maintenance tools. Usually when influx crashes on startup.
+
+Add a new line below `influxdb:` to your docker-compose.yml:
+```yaml
+  influxdb:
+    entrypoint: sleep infinity
+```
+
+Recreate the container using the new entrypoint:
+``` console
+pi@raspberrypi:~/IOTstack $ docker-compose up -d influxdb
+Recreating influxdb ... done
+```
+
+Now it should start and you can get a shell to poke around and try the
+influx_inspect:
+``` console
+$ docker exec -it influxdb bash
+root@5ecc8536174f:/# influx_inspect
+Usage: influx_inspect [[command] [arguments]]
+```
+You may need to do `apt-get update` and `apt-get install` some tools you need.
+The container is pretty bare-bones by default.
+
+Of course remove the custom entrypoint and "up -d" again to test if your fixes
+worked.
 
 ## Old-menu branch
 The credentials and default database name for influxdb are stored in the file called influxdb/influx.env . The default username and password is set to "nodered" for both. It is HIGHLY recommended that you change them. The environment file contains several commented out options allowing you to set several access options such as default admin user credentials as well as the default database name. Any change to the environment file will require a restart of the service.