Add Ubuntu 22.04 support

.puppet-lint.rc

@@ -1,3 +1 @@
 --fail-on-warnings
---no-parameter_documentation-check
---no-parameter_types-check

.sync.yml

@@ -1,4 +1,8 @@
 ---
+.puppet-lint.rc:
+  enabled_lint_checks:
+    - parameter_documentation
+    - parameter_types
 .travis.yml:
   docker_sets:
     - set: centos7-64

REFERENCE.md

@@ -30,12 +30,12 @@
 
 ### Data types
 
-* [`Corosync::ArrayRing`](#Corosync--ArrayRing)
+* [`Corosync::ArrayRing`](#Corosync--ArrayRing): Custom type for infinitely nestable arrays
 * [`Corosync::CryptoCipher`](#Corosync--CryptoCipher): Defines the allowed cipher types for secure corosync communication
-* [`Corosync::CryptoHash`](#Corosync--CryptoHash)
-* [`Corosync::IpStringIp`](#Corosync--IpStringIp)
-* [`Corosync::QuorumAlgorithm`](#Corosync--QuorumAlgorithm)
-* [`Corosync::Syslogpriority`](#Corosync--Syslogpriority)
+* [`Corosync::CryptoHash`](#Corosync--CryptoHash): Custom type for possible crypto hashes
+* [`Corosync::IpStringIp`](#Corosync--IpStringIp): Custom type for string <-> array of string variants
+* [`Corosync::QuorumAlgorithm`](#Corosync--QuorumAlgorithm): Custom type for quorumalgorithm enum
+* [`Corosync::Syslogpriority`](#Corosync--Syslogpriority): Custom type for syslog priority enum
 
 ## Classes
 
@@ -76,8 +76,10 @@ The following parameters are available in the `corosync` class:
 * [`authkey`](#-corosync--authkey)
 * [`crypto_hash`](#-corosync--crypto_hash)
 * [`crypto_cipher`](#-corosync--crypto_cipher)
+* [`config_validate_cmd`](#-corosync--config_validate_cmd)
 * [`threads`](#-corosync--threads)
 * [`bind_address`](#-corosync--bind_address)
+* [`pcs_version`](#-corosync--pcs_version)
 * [`port`](#-corosync--port)
 * [`multicast_address`](#-corosync--multicast_address)
 * [`unicast_addresses`](#-corosync--unicast_addresses)
@@ -137,11 +139,8 @@ The following parameters are available in the `corosync` class:
 * [`clear_node_high_bit`](#-corosync--clear_node_high_bit)
 * [`max_messages`](#-corosync--max_messages)
 * [`test_corosync_config`](#-corosync--test_corosync_config)
-* [`test_corosync_config_cmd`](#-corosync--test_corosync_config_cmd)
 * [`watchdog_device`](#-corosync--watchdog_device)
 * [`provider`](#-corosync--provider)
-* [`config_validate_cmd`](#-corosync--config_validate_cmd)
-* [`pcs_version`](#-corosync--pcs_version)
 
 ##### <a name="-corosync--enable_secauth"></a>`enable_secauth`
 
@@ -187,6 +186,14 @@ values are none, aes256, aes192, aes128, and 3des
 
 Default value: `'aes256'`
 
+##### <a name="-corosync--config_validate_cmd"></a>`config_validate_cmd`
+
+Data type: `String[1]`
+
+
+
+Default value: `'/usr/bin/env COROSYNC_MAIN_CONFIG_FILE=% /usr/sbin/corosync -t'`
+
 ##### <a name="-corosync--threads"></a>`threads`
 
 Data type: `Optional[Integer]`
@@ -206,6 +213,14 @@ Can be specified as an array to have multiple rings.
 
 Default value: `$corosync::params::bind_address`
 
+##### <a name="-corosync--pcs_version"></a>`pcs_version`
+
+Data type: `String`
+
+
+
+Default value: `''`
+
 ##### <a name="-corosync--port"></a>`port`
 
 Data type: `Optional[Variant[Stdlib::Port, Array[Stdlib::Port]]]`
@@ -774,10 +789,6 @@ Whether we should test new configuration files with `corosync -t`.
 
 Default value: `$corosync::params::test_corosync_config`
 
-##### <a name="-corosync--test_corosync_config_cmd"></a>`test_corosync_config_cmd`
-
-Override the standard config_validate_cmd which only works for corosync 2.x.
-
 ##### <a name="-corosync--watchdog_device"></a>`watchdog_device`
 
 Data type: `Optional[Variant[Stdlib::Absolutepath, Enum['off']]]`
@@ -795,22 +806,6 @@ What command line utility provides corosync configuration capabilities.
 
 Default value: `'pcs'`
 
-##### <a name="-corosync--config_validate_cmd"></a>`config_validate_cmd`
-
-Data type: `String[1]`
-
-
-
-Default value: `'/usr/bin/env COROSYNC_MAIN_CONFIG_FILE=% /usr/sbin/corosync -t'`
-
-##### <a name="-corosync--pcs_version"></a>`pcs_version`
-
-Data type: `String`
-
-
-
-Default value: `''`
-
 ### <a name="corosync--params"></a>`corosync::params`
 
 Configures sane defaults based on the operating system.
@@ -1802,7 +1797,7 @@ discover the appropriate provider for your platform.
 
 ### <a name="Corosync--ArrayRing"></a>`Corosync::ArrayRing`
 
-The Corosync::ArrayRing data type.
+Custom type for infinitely nestable arrays
 
 Alias of
 
@@ -1820,13 +1815,13 @@ Alias of `Enum['aes256', 'aes192', 'aes128', '3des']`
 
 ### <a name="Corosync--CryptoHash"></a>`Corosync::CryptoHash`
 
-The Corosync::CryptoHash data type.
+Custom type for possible crypto hashes
 
 Alias of `Enum['md5', 'sha1', 'sha256', 'sha384', 'sha512']`
 
 ### <a name="Corosync--IpStringIp"></a>`Corosync::IpStringIp`
 
-The Corosync::IpStringIp data type.
+Custom type for string <-> array of string variants
 
 Alias of
 
@@ -1838,13 +1833,13 @@ Variant[Stdlib::IP::Address, Array[
 
 ### <a name="Corosync--QuorumAlgorithm"></a>`Corosync::QuorumAlgorithm`
 
-The Corosync::QuorumAlgorithm data type.
+Custom type for quorumalgorithm enum
 
 Alias of `Enum['ffsplit', 'lms']`
 
 ### <a name="Corosync--Syslogpriority"></a>`Corosync::Syslogpriority`
 
-The Corosync::Syslogpriority data type.
+Custom type for syslog priority enum
 
 Alias of `Enum['debug', 'info', 'notice', 'warning', 'err', 'alert', 'emerg', 'crit']`
 

manifests/init.pp

@@ -24,6 +24,8 @@
 #   Encryption cipher used by corosync for intra-cluster communication. Valid
 #   values are none, aes256, aes192, aes128, and 3des
 #
+# @param config_validate_cmd
+#
 # @param threads
 #   How many threads you are going to let corosync use to encode and decode
 #   multicast messages.  If you turn off secauth then corosync will ignore
@@ -33,6 +35,8 @@
 #   The ip address we are going to bind the corosync daemon too.
 #   Can be specified as an array to have multiple rings.
 #
+# @param pcs_version
+#
 # @param port
 #   The UDP port that corosync will use to do its multicast communication. Be
 #   aware that corosync used this defined port plus minus one.
@@ -306,9 +310,6 @@
 #   Whether we should test new configuration files with `corosync -t`.
 #   (requires corosync 2.3.4)
 #
-# @param test_corosync_config_cmd
-#   Override the standard config_validate_cmd which only works for corosync 2.x.
-#
 # @param watchdog_device
 #   Watchdog device to use, for example '/dev/watchdog' or 'off'.
 #   Its presence (or lack thereof) shifted with corosync versions.

metadata.json

@@ -30,8 +30,8 @@
     {
       "operatingsystem": "Ubuntu",
       "operatingsystemrelease": [
-        "18.04",
-        "20.04"
+        "20.04",
+        "22.04"
       ]
     },
     {

spec/acceptance/cs_location_spec.rb

@@ -64,7 +64,7 @@ class { 'corosync':
     pp = <<-EOS
       cs_location { 'duncan_vip_there':
         primitive => 'duncan_vip',
-        node_name => $::hostname,
+        node_name => $facts['networking']['hostname'],
         score     => 'INFINITY',
       }
     EOS
@@ -93,7 +93,7 @@ class { 'corosync':
       cs_location { 'duncan_vip_there':
         primitive          => 'duncan_vip',
         resource_discovery => 'exclusive',
-        node_name          => $::hostname,
+        node_name          => $facts['networking']['hostname'],
         score              => 'INFINITY',
       }
     EOS

types/arrayring.pp

@@ -1,3 +1,5 @@
+# @summary Custom type for infinitely nestable arrays
+#
 type Corosync::ArrayRing = Variant[
   Array[Stdlib::IP::Address],
   Array[

types/cryptohash.pp

@@ -1,3 +1,5 @@
+# @summary Custom type for possible crypto hashes
+#
 type Corosync::CryptoHash = Enum[
   'md5',
   'sha1',

types/ipstringip.pp

@@ -1,3 +1,5 @@
+# @summary Custom type for string <-> array of string variants
+#
 type Corosync::IpStringIp = Variant[
   Stdlib::IP::Address,
   Array[

types/quorumalgorithm.pp

@@ -1,3 +1,5 @@
+# @summary Custom type for quorumalgorithm enum
+#
 type Corosync::QuorumAlgorithm = Enum[
   'ffsplit',
   'lms',

types/syslogpriority.pp

@@ -1,3 +1,5 @@
+# @summary Custom type for syslog priority enum
+#
 type Corosync::Syslogpriority = Enum[
   'debug',
   'info',