Merge 4.9.237 into android-4.9-q

Changes in 4.9.237
	ARM: dts: socfpga: fix register entry for timer3 on Arria10
	RDMA/rxe: Fix memleak in rxe_mem_init_user
	RDMA/rxe: Drop pointless checks in rxe_init_ports
	scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA
	drivers/net/wan/lapbether: Added needed_tailroom
	NFC: st95hf: Fix memleak in st95hf_in_send_cmd
	firestream: Fix memleak in fs_open
	ALSA: hda: Fix 2 channel swapping for Tegra
	drivers/net/wan/lapbether: Set network_header before transmitting
	xfs: initialize the shortform attr header padding entry
	irqchip/eznps: Fix build error for !ARC700 builds
	drivers/net/wan/hdlc_cisco: Add hard_header_len
	ALSA: hda: fix a runtime pm issue in SOF when integrated GPU is disabled
	gcov: Disable gcov build with GCC 10
	iio: adc: mcp3422: fix locking scope
	iio: adc: mcp3422: fix locking on error path
	iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set
	iio:light:ltr501 Fix timestamp alignment issue.
	iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.
	iio:adc:ina2xx Fix timestamp alignment issue.
	iio:adc:ti-adc081c Fix alignment and data leak issues
	drivers: iio: magnetometer: Fix sparse endianness warnings cast to restricted __be16
	iio:magnetometer:ak8975 Fix alignment and data leak issues.
	iio:light:max44000 Fix timestamp alignment and prevent data leak.
	iio: accel: kxsd9: Fix alignment of local buffer.
	iio:accel:mma7455: Fix timestamp alignment and prevent data leak.
	iio:accel:mma8452: Fix timestamp alignment and prevent data leak.
	USB: core: add helpers to retrieve endpoints
	staging: wlan-ng: fix out of bounds read in prism2sta_probe_usb()
	btrfs: fix wrong address when faulting in pages in the search ioctl
	regulator: push allocation in set_consumer_device_supply() out of lock
	scsi: target: iscsi: Fix data digest calculation
	scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem
	rbd: require global CAP_SYS_ADMIN for mapping and unmapping
	fbcon: remove soft scrollback code
	fbcon: remove now unusued 'softback_lines' cursor() argument
	vgacon: remove software scrollback support
	KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
	video: fbdev: fix OOB read in vga_8planes_imageblit()
	staging: greybus: audio: fix uninitialized value issue
	usb: core: fix slab-out-of-bounds Read in read_descriptors
	USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
	USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
	usb: Fix out of sync data toggle if a configured device is reconfigured
	IB/rxe: Remove a pointless indirection layer
	RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars
	gcov: add support for GCC 10.1
	net: handle the return value of pskb_carve_frag_list() correctly
	NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall
	scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort
	scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery
	spi: spi-loopback-test: Fix out-of-bounds read
	SUNRPC: stop printk reading past end of string
	rapidio: Replace 'select' DMAENGINES 'with depends on'
	i2c: algo: pca: Reapply i2c bus settings after reset
	clk: rockchip: Fix initialization of mux_pll_src_4plls_p
	Drivers: hv: vmbus: Add timeout to vmbus_wait_for_unload
	MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT
	perf test: Free formats for perf pmu parse test
	fbcon: Fix user font detection test at fbcon_resize().
	MIPS: SNI: Fix spurious interrupts
	drm/mediatek: Add exception handing in mtk_drm_probe() if component init fail
	USB: quirks: Add USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk for BYD zhaoxin notebook
	USB: UAS: fix disconnect by unplugging a hub
	usblp: fix race between disconnect() and read()
	Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists
	serial: 8250_pci: Add Realtek 816a and 816b
	ehci-hcd: Move include to keep CRC stable
	powerpc/dma: Fix dma_map_ops::get_required_mask
	x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y
	Linux 4.9.237

Signed-off-by: Greg Kroah-Hartman <[email protected]>
Change-Id: I675fbd4859f56d7dfefa3f23bcf61e38c3bebdc1

Makefile

@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 236
+SUBLEVEL = 237
 EXTRAVERSION =
 NAME = Roaring Lionus
 

arch/arc/plat-eznps/include/plat/ctop.h

@@ -42,7 +42,6 @@
 #define CTOP_AUX_HW_COMPLY			(CTOP_AUX_BASE + 0x024)
 #define CTOP_AUX_LPC				(CTOP_AUX_BASE + 0x030)
 #define CTOP_AUX_EFLAGS				(CTOP_AUX_BASE + 0x080)
-#define CTOP_AUX_IACK				(CTOP_AUX_BASE + 0x088)
 #define CTOP_AUX_GPA1				(CTOP_AUX_BASE + 0x08C)
 #define CTOP_AUX_UDMC				(CTOP_AUX_BASE + 0x300)
 

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -710,7 +710,7 @@
 		timer3: timer3@ffd00100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0xffd01000 0x100>;
+			reg = <0xffd00100 0x100>;
 			clocks = <&l4_sys_free_clk>;
 			clock-names = "timer";
 		};

arch/mips/Kconfig

@@ -848,6 +848,7 @@ config SNI_RM
 	select I8253
 	select I8259
 	select ISA
+	select MIPS_L1_CACHE_SHIFT_6
 	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000

arch/mips/sni/a20r.c

@@ -143,7 +143,10 @@ static struct platform_device sc26xx_pdev = {
 	},
 };
 
-static u32 a20r_ack_hwint(void)
+/*
+ * Trigger chipset to update CPU's CAUSE IP field
+ */
+static u32 a20r_update_cause_ip(void)
 {
 	u32 status = read_c0_status();
 
@@ -205,12 +208,14 @@ static void a20r_hwint(void)
 	int irq;
 
 	clear_c0_status(IE_IRQ0);
-	status = a20r_ack_hwint();
+	status = a20r_update_cause_ip();
 	cause = read_c0_cause();
 
 	irq = ffs(((cause & status) >> 8) & 0xf8);
 	if (likely(irq > 0))
 		do_IRQ(SNI_A20R_IRQ_BASE + irq - 1);
+
+	a20r_update_cause_ip();
 	set_c0_status(IE_IRQ0);
 }
 

arch/powerpc/configs/pasemi_defconfig

@@ -115,7 +115,6 @@ CONFIG_FB_NVIDIA=y
 CONFIG_FB_NVIDIA_I2C=y
 CONFIG_FB_RADEON=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y

arch/powerpc/configs/ppc6xx_defconfig

@@ -796,7 +796,6 @@ CONFIG_FB_TRIDENT=m
 CONFIG_FB_SM501=m
 CONFIG_FB_IBM_GXT4500=y
 CONFIG_LCD_PLATFORM=m
-CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y

arch/powerpc/kernel/dma-iommu.c

@@ -99,7 +99,8 @@ static u64 dma_iommu_get_required_mask(struct device *dev)
 	if (!tbl)
 		return 0;
 
-	mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
+	mask = 1ULL << (fls_long(tbl->it_offset + tbl->it_size) +
+			tbl->it_page_shift - 1);
 	mask += mask - 1;
 
 	return mask;

arch/x86/configs/i386_defconfig

@@ -217,7 +217,6 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_EFI=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -247,6 +246,7 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y

arch/x86/configs/x86_64_defconfig

@@ -212,7 +212,6 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_EFI=y
 # CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -242,6 +241,7 @@ CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y

arch/x86/kvm/vmx.c

@@ -8606,6 +8606,7 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
 			(exit_reason != EXIT_REASON_EXCEPTION_NMI &&
 			exit_reason != EXIT_REASON_EPT_VIOLATION &&
 			exit_reason != EXIT_REASON_PML_FULL &&
+			exit_reason != EXIT_REASON_APIC_ACCESS &&
 			exit_reason != EXIT_REASON_TASK_SWITCH)) {
 		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
 		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_DELIVERY_EV;

drivers/atm/firestream.c

@@ -1013,6 +1013,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
 				error = make_rate (pcr, r, &tmc0, NULL);
 				if (error) {
 					kfree(tc);
+					kfree(vcc);
 					return error;
 				}
 			}

drivers/block/rbd.c

@@ -4614,6 +4614,9 @@ static ssize_t rbd_config_info_show(struct device *dev,
 {
 	struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	return sprintf(buf, "%s\n", rbd_dev->config_info);
 }
 
@@ -4715,6 +4718,9 @@ static ssize_t rbd_image_refresh(struct device *dev,
 	struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
 	int ret;
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	ret = rbd_dev_refresh(rbd_dev);
 	if (ret)
 		return ret;
@@ -6192,6 +6198,9 @@ static ssize_t do_rbd_add(struct bus_type *bus,
 	bool read_only;
 	int rc;
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	if (!try_module_get(THIS_MODULE))
 		return -ENODEV;
 
@@ -6340,6 +6349,9 @@ static ssize_t do_rbd_remove(struct bus_type *bus,
 	bool force = false;
 	int ret;
 
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
 	dev_id = -1;
 	opt_buf[0] = '\0';
 	sscanf(buf, "%d %5s", &dev_id, opt_buf);

drivers/clk/rockchip/clk-rk3228.c

@@ -126,7 +126,7 @@ PNAME(mux_usb480m_p)		= { "usb480m_phy", "xin24m" };
 PNAME(mux_hdmiphy_p)		= { "hdmiphy_phy", "xin24m" };
 PNAME(mux_aclk_cpu_src_p)	= { "cpll_aclk_cpu", "gpll_aclk_cpu", "hdmiphy_aclk_cpu" };
 
-PNAME(mux_pll_src_4plls_p)	= { "cpll", "gpll", "hdmiphy" "usb480m" };
+PNAME(mux_pll_src_4plls_p)	= { "cpll", "gpll", "hdmiphy", "usb480m" };
 PNAME(mux_pll_src_3plls_p)	= { "cpll", "gpll", "hdmiphy" };
 PNAME(mux_pll_src_2plls_p)	= { "cpll", "gpll" };
 PNAME(mux_sclk_hdmi_cec_p)	= { "cpll", "gpll", "xin24m" };

drivers/gpu/drm/mediatek/mtk_drm_drv.c

@@ -457,8 +457,13 @@ static int mtk_drm_probe(struct platform_device *pdev)
 	pm_runtime_disable(dev);
 err_node:
 	of_node_put(private->mutex_node);
-	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++)
+	for (i = 0; i < DDP_COMPONENT_ID_MAX; i++) {
 		of_node_put(private->comp_node[i]);
+		if (private->ddp_comp[i]) {
+			put_device(private->ddp_comp[i]->larb_dev);
+			private->ddp_comp[i] = NULL;
+		}
+	}
 	return ret;
 }
 

drivers/hv/channel_mgmt.c

@@ -681,7 +681,7 @@ static void vmbus_wait_for_unload(void)
 	void *page_addr;
 	struct hv_message *msg;
 	struct vmbus_channel_message_header *hdr;
-	u32 message_type;
+	u32 message_type, i;
 
 	/*
 	 * CHANNELMSG_UNLOAD_RESPONSE is always delivered to the CPU which was
@@ -691,8 +691,11 @@ static void vmbus_wait_for_unload(void)
 	 * functional and vmbus_unload_response() will complete
 	 * vmbus_connection.unload_event. If not, the last thing we can do is
 	 * read message pages for all CPUs directly.
+	 *
+	 * Wait no more than 10 seconds so that the panic path can't get
+	 * hung forever in case the response message isn't seen.
 	 */
-	while (1) {
+	for (i = 0; i < 1000; i++) {
 		if (completion_done(&vmbus_connection.unload_event))
 			break;
 

drivers/i2c/algos/i2c-algo-pca.c

@@ -50,8 +50,22 @@ static void pca_reset(struct i2c_algo_pca_data *adap)
 		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
 		pca_outw(adap, I2C_PCA_IND, 0xA5);
 		pca_outw(adap, I2C_PCA_IND, 0x5A);
+
+		/*
+		 * After a reset we need to re-apply any configuration
+		 * (calculated in pca_init) to get the bus in a working state.
+		 */
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IMODE);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.mode);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.tlow);
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
+		pca_outw(adap, I2C_PCA_IND, adap->bus_settings.thi);
+
+		pca_set_con(adap, I2C_PCA_CON_ENSIO);
 	} else {
 		adap->reset_chip(adap->data);
+		pca_set_con(adap, I2C_PCA_CON_ENSIO | adap->bus_settings.clock_freq);
 	}
 }
 
@@ -435,13 +449,14 @@ static int pca_init(struct i2c_adapter *adap)
 				" Use the nominal frequency.\n", adap->name);
 		}
 
-		pca_reset(pca_data);
-
 		clock = pca_clock(pca_data);
 		printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
 		     adap->name, freqs[clock]);
 
-		pca_set_con(pca_data, I2C_PCA_CON_ENSIO | clock);
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.clock_freq = clock;
+
+		pca_reset(pca_data);
 	} else {
 		int clock;
 		int mode;
@@ -508,19 +523,15 @@ static int pca_init(struct i2c_adapter *adap)
 			thi = tlow * min_thi / min_tlow;
 		}
 
+		/* Store settings as these will be needed when the PCA chip is reset */
+		pca_data->bus_settings.mode = mode;
+		pca_data->bus_settings.tlow = tlow;
+		pca_data->bus_settings.thi = thi;
+
 		pca_reset(pca_data);
 
 		printk(KERN_INFO
 		     "%s: Clock frequency is %dHz\n", adap->name, clock * 100);
-
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IMODE);
-		pca_outw(pca_data, I2C_PCA_IND, mode);
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLL);
-		pca_outw(pca_data, I2C_PCA_IND, tlow);
-		pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_ISCLH);
-		pca_outw(pca_data, I2C_PCA_IND, thi);
-
-		pca_set_con(pca_data, I2C_PCA_CON_ENSIO);
 	}
 	udelay(500); /* 500 us for oscillator to stabilise */
 

drivers/iio/accel/bmc150-accel-core.c

@@ -197,6 +197,14 @@ struct bmc150_accel_data {
 	struct mutex mutex;
 	u8 fifo_mode, watermark;
 	s16 buffer[8];
+	/*
+	 * Ensure there is sufficient space and correct alignment for
+	 * the timestamp if enabled
+	 */
+	struct {
+		__le16 channels[3];
+		s64 ts __aligned(8);
+	} scan;
 	u8 bw_bits;
 	u32 slope_dur;
 	u32 slope_thres;
@@ -933,15 +941,16 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev,
 	 * now.
 	 */
 	for (i = 0; i < count; i++) {
-		u16 sample[8];
 		int j, bit;
 
 		j = 0;
 		for_each_set_bit(bit, indio_dev->active_scan_mask,
 				 indio_dev->masklength)
-			memcpy(&sample[j++], &buffer[i * 3 + bit], 2);
+			memcpy(&data->scan.channels[j++], &buffer[i * 3 + bit],
+			       sizeof(data->scan.channels[0]));
 
-		iio_push_to_buffers_with_timestamp(indio_dev, sample, tstamp);
+		iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
+						   tstamp);
 
 		tstamp += sample_period;
 	}

drivers/iio/accel/kxsd9.c

@@ -212,22 +212,28 @@ static irqreturn_t kxsd9_trigger_handler(int irq, void *p)
 	const struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct kxsd9_state *st = iio_priv(indio_dev);
+	/*
+	 * Ensure correct positioning and alignment of timestamp.
+	 * No need to zero initialize as all elements written.
+	 */
+	struct {
+		__be16 chan[4];
+		s64 ts __aligned(8);
+	} hw_values;
 	int ret;
-	/* 4 * 16bit values AND timestamp */
-	__be16 hw_values[8];
 
 	ret = regmap_bulk_read(st->map,
 			       KXSD9_REG_X,
-			       &hw_values,
-			       8);
+			       hw_values.chan,
+			       sizeof(hw_values.chan));
 	if (ret) {
 		dev_err(st->dev,
 			"error reading data\n");
 		return ret;
 	}
 
 	iio_push_to_buffers_with_timestamp(indio_dev,
-					   hw_values,
+					   &hw_values,
 					   iio_get_time_ns(indio_dev));
 	iio_trigger_notify_done(indio_dev->trig);
 

drivers/iio/accel/mma7455_core.c

@@ -55,6 +55,14 @@
 
 struct mma7455_data {
 	struct regmap *regmap;
+	/*
+	 * Used to reorganize data.  Will ensure correct alignment of
+	 * the timestamp if present
+	 */
+	struct {
+		__le16 channels[3];
+		s64 ts __aligned(8);
+	} scan;
 };
 
 static int mma7455_drdy(struct mma7455_data *mma7455)
@@ -85,19 +93,19 @@ static irqreturn_t mma7455_trigger_handler(int irq, void *p)
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct mma7455_data *mma7455 = iio_priv(indio_dev);
-	u8 buf[16]; /* 3 x 16-bit channels + padding + ts */
 	int ret;
 
 	ret = mma7455_drdy(mma7455);
 	if (ret)
 		goto done;
 
-	ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL, buf,
-			       sizeof(__le16) * 3);
+	ret = regmap_bulk_read(mma7455->regmap, MMA7455_REG_XOUTL,
+			       mma7455->scan.channels,
+			       sizeof(mma7455->scan.channels));
 	if (ret)
 		goto done;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &mma7455->scan,
 					   iio_get_time_ns(indio_dev));
 
 done: