Temper ZMK Config

This is my personal ZMK config for the temper. This repository contains zmk configuration for the Temper keyboard using two microcontrollers and additionally on configuration using a dongle which is connected to your computer via cable.

How to build locally

1. Setup ZMK for local development first. Follow therfore precisely the documentation: https://zmk.dev/docs/development/setup/native

2. Additional requirements: yq

3. Change the paths in the environment variables in the build.sh file to match your paths.

4. Run the script

   ./build.sh

   This will create a directory called output and in there are all the .uf2 files

5. Flash your microcontrollers with the resulting .uf2 files

Extra notes on the dongle part

1. Flash all three microcontrollers with the reset firmware which has been build. All three with the same .uf2 firmware. More information about this step can be found in the official documentation of ZMK https://zmk.dev/docs/troubleshooting/connection-issues#acquiring-a-reset-uf2.
2. Flash all microcontrollers with their respective firmware
3. Turn off bluetooth, plug in the dongle and everything should be working out of the box.