Expose rollup transaction statuses over sequencer RPC #4737

Workflow file for this run

	name: Rust

	# On Rust, GitHub Actions, and caching
	# ===========
	# Here's a list of things to keep in mind if you find yourself maintaining this
	# CI:
	#
	# https://docs.github.com/en/actions/using-workflows/caching-dependencies-to-speed-up-workflows#matching-a-cache-key
	#
	# - Always install and select the desired Rust toolchain before running
	# `Swatinem/rust-cache`. This is because the active Rust toolchain is used as
	# a cache key.
	# - You can use `rustup show` to install and select the right Rust toolchain if
	# you have a `rust-toolchain.toml` file:
	# https://github.com/rust-lang/rustup/issues/1397.
	# - When caching Rust compilation artifacts, keep in mind that different `cargo`
	# commands will use different profiles
	# (https://doc.rust-lang.org/cargo/reference/profiles.html). Learn what you
	# can reuse between one job and another and don't assume two commands will
	# just share caches without conflicts.
	# - Be extremely aware of cache thrashing a.k.a. churning. GitHub Actions' cache
	# allows for 10GiB of data which is easily exceeded if not careful.
	# Sometimes it's better not to cache than cache excessively.
	# Disabling cache writes for non-default branches altogether if cache churning
	# is unacceptably high is supposed to help with this.
	# - Learn cache invalidation rules of `Swatinem/rust-cache` before making
	# changes, e.g. what happens when `rustc --version` changes or `Cargo.lock`
	# changes (or is missing).
	# - The jobs dependency tree is the way it is to accommodate for sharing caches,
	# not necessarily because it makes logical sense to run one job after the
	# other. This is due to the fact that we can't share caches between jobs that
	# run in parallel.
	# - `sccache` is a good alternative to `Swatinem/rust-cache`, but it behaves
	# poorly with GHA and often incurs into cache requests rate limits. We should
	# probably explore `sccache` with a different backend.
	# - If a job makes good use of extra cores, consider give it a bigger machine.
	# GHA larger runners increase in cost linearly with the number of cores
	# (https://docs.github.com/en/billing/managing-billing-for-github-actions/about-billing-for-github-actions),
	# so you're not wasting money unless several cores are sitting idle for long.

	on:
	# Relevant docs:
	# - https://docs.github.com/en/repositories/configuring-branches-and-merges-in-your-repository/configuring-pull-request-merges/managing-a-merge-queue#how-merge-queues-work
	# - https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#merge_group
	merge_group:
	types: ["checks_requested"]
	push:
	branches: ["nightly", "stable"]
	pull_request:
	branches: ["nightly", "stable"]

	env:
	CARGO_TERM_COLOR: always
	RUSTFLAGS: -D warnings

	# Automatically cancels a job if a new commit if pushed to the same PR, branch, or tag.
	# Source: <https://stackoverflow.com/a/72408109/5148606>
	concurrency:
	group: ${{ github.workflow }}-${{ github.event.pull_request.number \|\| github.ref }}
	# Except in `nightly` and `stable` branches! Any cancelled job will cause the
	# CI run to fail, and we want to keep a clean history for major branches.
	cancel-in-progress: ${{ (github.ref != 'refs/heads/nightly') && (github.ref != 'refs/heads/stable') }}

	jobs:
	check-aggregate:
	# Follows the guide at <https://github.com/re-actors/alls-green>.
	runs-on: ubuntu-latest
	if: always()
	needs:
	# If you're modifying this workflow file and you're adding/removing a job
	# which should be required to pass before merging a PR, don't forget to
	# update this list!
	- check
	- check_no_std
	- hack
	- nextest
	- test
	- coverage
	- check-licenses
	- cargo-doc-artifact
	- deploy-github-pages
	- check-demo-rollup-table-of-contents
	- check-demo-rollup-bash-commands
	- validate-packages-to-publish-yml
	steps:
	- name: Compute whether the needed jobs succeeded or failed
	uses: re-actors/alls-green@release/v1
	with:
	allowed-skips: deploy-github-pages
	jobs: ${{ toJSON(needs) }}

	check:
	name: check
	runs-on: buildjet-4vcpu-ubuntu-2204
	timeout-minutes: 60
	steps:
	- uses: actions/checkout@v3
	- uses: rui314/setup-mold@v1
	- name: Install Protoc
	uses: arduino/setup-protoc@v2
	with:
	version: "23.2"
	repo-token: ${{ secrets.GITHUB_TOKEN }}
	- name: Install Rust
	run: rustup show && rustup install nightly && rustup component add rustfmt --toolchain nightly-x86_64-unknown-linux-gnu # Nightly is needed for our configuration of cargo fmt
	- name: Install cargo-risczero
	uses: taiki-e/install-action@v2
	with:
	tool: [email protected]
	- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
	run: cargo risczero install
	env:
	GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
	- uses: Swatinem/rust-cache@v2
	with:
	cache-provider: "buildjet"
	shared-key: cargo-check-cache
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	workspaces: \|
	.
	fuzz
	env:
	GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
	- name: Run lint
	run: \|
	if ! make lint ; then
	echo "Linting or formatting errors detected, please run 'make lint-fix' to fix it";
	exit 1
	fi

	check_no_std:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@v3
	- name: Install Rust Bare Metal
	uses: actions-rs/toolchain@v1
	with:
	toolchain: stable
	target: thumbv6m-none-eabi
	override: true
	- name: Install Rust WASM
	uses: actions-rs/toolchain@v1
	with:
	toolchain: stable
	target: wasm32-unknown-unknown
	override: true
	- name: cargo install cargo-hack
	uses: taiki-e/install-action@cargo-hack
	- uses: Swatinem/rust-cache@v2
	with:
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	- name: Run check
	run: make check-no-std

	prover_bench_check:
	name: prover_bench_check
	needs: check
	runs-on: buildjet-8vcpu-ubuntu-2204
	timeout-minutes: 120
	steps:
	- uses: actions/checkout@v3
	- uses: rui314/setup-mold@v1
	- name: Install Protoc
	uses: arduino/setup-protoc@v2
	with:
	version: "23.2"
	repo-token: ${{ secrets.GITHUB_TOKEN }}
	- name: Install Rust
	run: rustup show && rustup install nightly && rustup component add rustfmt --toolchain nightly-x86_64-unknown-linux-gnu
	- name: Install cargo-risczero
	uses: taiki-e/install-action@v2
	with:
	tool: [email protected]
	- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
	run: cargo risczero install
	env:
	GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
	- uses: Swatinem/rust-cache@v2
	with:
	cache-provider: "buildjet"
	shared-key: cargo-check-cache
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	workspaces: \|
	.
	fuzz
	- name: cargo prover bench check
	env:
	BLOCKS: 1
	TXNS_PER_BLOCK: 10
	NUM_PUB_KEYS: 100
	run: cargo bench --bench prover_bench --features bench

	bench_check:
	name: bench_check
	needs: check
	runs-on: buildjet-8vcpu-ubuntu-2204
	timeout-minutes: 120
	steps:
	- uses: actions/checkout@v3
	- uses: rui314/setup-mold@v1
	- name: Install Protoc
	uses: arduino/setup-protoc@v2
	with:
	version: "23.2"
	repo-token: ${{ secrets.GITHUB_TOKEN }}
	- name: Install Rust
	run: rustup show && rustup install nightly && rustup component add rustfmt --toolchain nightly-x86_64-unknown-linux-gnu
	- name: Install cargo-risczero
	uses: taiki-e/install-action@v2
	with:
	tool: [email protected]
	- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
	run: cargo risczero install
	env:
	GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
	- uses: Swatinem/rust-cache@v2
	with:
	cache-provider: "buildjet"
	shared-key: cargo-check-cache
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	workspaces: \|
	.
	fuzz
	- name: cargo bench check
	env:
	BLOCKS: 1
	TXNS_PER_BLOCK: 10
	NUM_PUB_KEYS: 100
	run: cargo bench

	# Check that every combination of features is working properly.
	hack:
	name: features
	# `cargo-hack` uses the same profile as `cargo check` and doesn't require
	# building dependencies, only checking them, so we can share caches
	# effectively.
	needs: check
	runs-on: buildjet-8vcpu-ubuntu-2204
	timeout-minutes: 120
	env:
	SKIP_GUEST_BUILD: "1"
	steps:
	- uses: actions/checkout@v3
	- uses: rui314/setup-mold@v1
	- name: Install Protoc
	uses: arduino/setup-protoc@v2
	with:
	version: "23.2"
	repo-token: ${{ secrets.GITHUB_TOKEN }}
	- name: Install Rust
	run: rustup show
	- name: cargo install cargo-hack
	uses: taiki-e/install-action@cargo-hack
	- uses: Swatinem/rust-cache@v2
	with:
	cache-provider: "buildjet"
	shared-key: cargo-check-cache
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	workspaces: \|
	.
	fuzz
	# intentionally no target specifier; see https://github.com/jonhoo/rust-ci-conf/pull/4
	- name: cargo hack
	run: make check-features
	nextest:
	name: nextest
	runs-on: buildjet-4vcpu-ubuntu-2204
	timeout-minutes: 60
	steps:
	- uses: actions/checkout@v3
	- uses: rui314/setup-mold@v1
	- name: Install Protoc
	uses: arduino/setup-protoc@v2
	with:
	version: "23.2"
	repo-token: ${{ secrets.GITHUB_TOKEN }}
	- name: Install cargo-risczero
	uses: taiki-e/install-action@v2
	with:
	tool: [email protected]
	- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
	run: cargo risczero install
	env:
	GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
	# `cargo-nextest` is much faster than standard `cargo test`.
	- uses: taiki-e/install-action@nextest
	- name: Install Rust
	run: rustup show
	- uses: Swatinem/rust-cache@v2
	with:
	cache-provider: "buildjet"
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	- run: cargo nextest run --workspace --all-features
	test:
	name: test
	runs-on: buildjet-4vcpu-ubuntu-2204
	timeout-minutes: 60
	steps:
	- uses: actions/checkout@v3
	- uses: rui314/setup-mold@v1
	- name: Install Protoc
	uses: arduino/setup-protoc@v2
	with:
	version: "23.2"
	repo-token: ${{ secrets.GITHUB_TOKEN }}
	- name: Install cargo-risczero
	uses: taiki-e/install-action@v2
	with:
	tool: [email protected]
	- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
	run: cargo risczero install
	env:
	GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
	- name: Install Rust
	run: rustup show
	- uses: Swatinem/rust-cache@v2
	with:
	cache-provider: "buildjet"
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	# `cargo-nextest` does not support doctests (yet?), so we have to run them
	# separately.
	# TODO: https://github.com/nextest-rs/nextest/issues/16
	- run: cargo test --workspace --doc --all-features
	coverage:
	name: coverage
	runs-on: buildjet-8vcpu-ubuntu-2204
	timeout-minutes: 90
	steps:
	- uses: actions/checkout@v3
	with:
	submodules: true
	- uses: rui314/setup-mold@v1
	- name: Install Protoc
	uses: arduino/setup-protoc@v2
	with:
	version: "23.2"
	repo-token: ${{ secrets.GITHUB_TOKEN }}
	- name: Install Rust
	run: rustup show
	- name: add llvm component
	run: rustup component add llvm-tools-preview
	- name: cargo install cargo-llvm-cov
	uses: taiki-e/install-action@cargo-llvm-cov
	- name: Install cargo-risczero
	uses: taiki-e/install-action@v2
	with:
	tool: [email protected]
	- name: Install risc0-zkvm toolchain
	run: cargo risczero install
	env:
	GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
	- uses: Swatinem/rust-cache@v2
	with:
	cache-provider: "buildjet"
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	- name: cargo generate-lockfile
	if: hashFiles('Cargo.lock') == ''
	run: cargo generate-lockfile
	- name: cargo llvm-cov
	run: make coverage
	- name: Upload to codecov.io
	uses: codecov/codecov-action@v3
	with:
	# When retry is implemented, we can enable it again: https://github.com/codecov/codecov-action/issues/926
	fail_ci_if_error: false
	check-licenses:
	runs-on: ubuntu-latest
	timeout-minutes: 30
	steps:
	- uses: actions/checkout@v3
	- uses: taiki-e/install-action@cargo-deny
	- run: cargo deny check licenses
	cargo-doc-artifact:
	runs-on: ubuntu-latest
	timeout-minutes: 90
	env:
	RUSTDOCFLAGS: "-D warnings"
	SKIP_GUEST_BUILD: "1"
	steps:
	- uses: actions/checkout@v3
	# Not sure installing `mold` is actually needed, but it's what the
	# `check` job, and we'd rather keep things as similar as possible.
	- uses: rui314/setup-mold@v1
	- name: Install Protoc
	uses: arduino/setup-protoc@v2
	with:
	version: "23.2"
	repo-token: ${{ secrets.GITHUB_TOKEN }}
	- name: Install Rust
	run: rustup show
	- uses: Swatinem/rust-cache@v2
	with:
	cache-provider: "buildjet"
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	# The docs' artifact tends to become quite large with all the
	# dependencies, so we don't include them.
	- run: cargo doc --no-deps --all-features
	- name: Add index.html
	# We're inside a Cargo workspace, so there's no index.html by default.
	# We must redirect to one of the workspace member crates' documentation.
	# <https://dev.to/deciduously/prepare-your-rust-api-docs-for-github-pages-2n5i>
	run: echo '<meta http-equiv="refresh" content="0; url=sov_rollup_interface/index.html">' > target/doc/index.html
	# https://github.com/actions/deploy-pages/issues/188
	- name: Fix assets' file permissions
	run: chmod -c -R +rX "target/doc"
	- name: Upload artifacts
	uses: actions/upload-pages-artifact@v1
	with:
	path: target/doc
	deploy-github-pages:
	needs: cargo-doc-artifact
	timeout-minutes: 5
	if: github.ref == 'refs/heads/stable'
	# Grant GITHUB_TOKEN the permissions required to make a Pages deployment
	permissions:
	pages: write # to deploy to Pages
	id-token: write # to verify the deployment originates from an appropriate source
	# Deploy to the github-pages environment
	environment:
	name: github-pages
	url: ${{ steps.deployment.outputs.page_url }}
	runs-on: ubuntu-latest
	steps:
	- name: Deploy to GitHub Pages
	id: deployment
	uses: actions/deploy-pages@v2
	check-demo-rollup-table-of-contents:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@v3
	- uses: actions/setup-node@v3
	- run: npm install -g doctoc
	- name: Update table of contents for mock-da
	run: doctoc README.md --github --notitle
	working-directory: ./examples/demo-rollup
	- name: Update table of contents for celestia-da
	run: doctoc README_CELESTIA.md --github --notitle
	working-directory: ./examples/demo-rollup
	- name: Check table of contents
	# Exit status 0 means no changes were made, so the table of contents is
	# up to date.
	run: git diff --exit-code
	check-demo-rollup-bash-commands:
	runs-on: buildjet-4vcpu-ubuntu-2204
	needs: nextest
	timeout-minutes: 60
	steps:
	- uses: actions/checkout@v3
	- uses: rui314/setup-mold@v1
	- name: Install Protoc
	uses: arduino/setup-protoc@v2
	with:
	version: "23.2"
	repo-token: ${{ secrets.GITHUB_TOKEN }}
	- name: Install cargo-risczero
	uses: taiki-e/install-action@v2
	with:
	tool: [email protected]
	- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
	run: cargo risczero install
	env:
	GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
	- name: Install Rust
	run: rustup show
	- uses: Swatinem/rust-cache@v2
	with:
	cache-provider: "buildjet"
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	- name: Compile README.md to Bash
	run: cargo run --bin bashtestmd -- --input examples/demo-rollup/README_CELESTIA.md --output demo-rollup-readme.sh --tag test-ci
	- run: cat demo-rollup-readme.sh
	- run: chmod +x demo-rollup-readme.sh && ./demo-rollup-readme.sh
	check-demo-rollup-bash-commands-mock-da:
	runs-on: buildjet-4vcpu-ubuntu-2204
	needs: nextest
	timeout-minutes: 60
	steps:
	- uses: actions/checkout@v3
	- uses: rui314/setup-mold@v1
	- name: Install Protoc
	uses: arduino/setup-protoc@v2
	with:
	version: "23.2"
	repo-token: ${{ secrets.GITHUB_TOKEN }}
	- name: Install cargo-risczero
	uses: taiki-e/install-action@v2
	with:
	tool: [email protected]
	- name: Install risc0-zkvm toolchain # Use the risc0 cargo extension to install the risc0 std library for the current toolchain
	run: cargo risczero install
	env:
	GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
	- name: Install Rust
	run: rustup show
	- uses: Swatinem/rust-cache@v2
	with:
	cache-provider: "buildjet"
	save-if: ${{ github.ref == 'refs/heads/nightly' }}
	- name: Compile README.md to Bash
	run: cargo run --bin bashtestmd -- --input examples/demo-rollup/README.md --output demo-rollup-readme.sh --tag test-ci
	- run: cat demo-rollup-readme.sh
	- run: chmod +x demo-rollup-readme.sh && ./demo-rollup-readme.sh

	validate-packages-to-publish-yml:
	runs-on: ubuntu-latest
	steps:
	- uses: actions/checkout@v3
	- run: ./scripts/validate_packages_to_publish_yml.sh
	shell: bash
	working-directory: .

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Expose rollup transaction statuses over sequencer RPC #4737

Workflow file

Expose rollup transaction statuses over sequencer RPC #4737

Jobs

Run details

Workflow file for this run