arch/arm64/src/imx9: Flex-IO based PWM driver for imx9

This is a high resolution PWM driver, utilizing one 16-bit Flex-IO timer for
generating PWM period and the rest of the timers to generate PWM duty cycles.

This means that the period has to be the same for every PWM generated from one
FLEXIO block, but this way we can get 16-bit resolution for the PWM signals.

For a typical IMX9 HW there are 8 timers for each Flex-IO block, which means
that by using this driver one can get 7 PWM outputs from one block.

This driver can be later extended to have configuration options to use all
8 channels per flex-io by either using 8+8 -bit timer (less resolution) or by
using an external trigger from an LPIT.

Signed-off-by: Jukka Laitinen <[email protected]>

arch/arm64/src/imx9/Kconfig

@@ -16,16 +16,57 @@ config ARCH_CHIP_IMX93
 	select ARCH_HAVE_MULTICPU
 	select ARMV8A_HAVE_GICv3
 	select ARCH_CORTEX_A55
+	select ARCH_HAVE_PWM_MULTICHAN
 
 endchoice # i.MX9 Chip Selection
 
 endmenu # "i.MX9 Chip Selection"
 
+config IMX9_FLEXIO_PWM
+	bool
+	select PWM_MULTICHAN
+	default n
+
 menu "i.MX9 Peripheral Selection"
 config IMX9_UART1
 	bool "UART1"
 	default n
 	select UART1_SERIALDRIVER
+
+config IMX9_FLEXIO1_PWM
+	depends on PWM
+	bool "Enable FLEXIO1 based PWM generation"
+	select IMX9_FLEXIO_PWM
+	default n
+
+config IMX9_FLEXIO2_PWM
+	depends on PWM
+	bool "Enable FLEXIO2 based PWM generation"
+	select IMX9_FLEXIO_PWM
+	default n
+
+config IMX9_FLEXIO1_PWM_NCHANNELS
+	depends on IMX9_FLEXIO1_PWM
+	int "Number of channels for FLEXIO1"
+	default 4
+	range 1 7
+
+config IMX9_FLEXIO1_PWM_CHANNEL_PINS
+	depends on IMX9_FLEXIO1_PWM
+	hex "FlexIO outputs used for FLEXIO1 timers"
+	default 0x0000000007060504
+
+config IMX9_FLEXIO2_PWM_NCHANNELS
+	depends on IMX9_FLEXIO2_PWM
+	int "Number of channels for FLEXIO2"
+	default 1
+	range 1 7
+
+config IMX9_FLEXIO2_PWM_CHANNEL_PINS
+	depends on IMX9_FLEXIO2_PWM
+	hex "FlexIO outputs used for FLEXIO2 timers"
+	default 0x0000000000000000
+
 endmenu # iMX Peripheral Selection
 
 config IMX9_GPIO_IRQ

arch/arm64/src/imx9/Make.defs

@@ -34,3 +34,7 @@ endif
 ifeq ($(CONFIG_IMX9_GPIO_IRQ),y)
   CHIP_CSRCS += imx9_gpioirq.c
 endif
+
+ifeq ($(CONFIG_IMX9_FLEXIO_PWM),y)
+  CHIP_CSRCS += imx9_flexio_pwm.c
+endif