Skip to content
This repository has been archived by the owner on Dec 30, 2023. It is now read-only.

Connection of the electronics

Jump to bottom
Carlos Garcia Saura edited this page Oct 8, 2015 · 6 revisions

Once you have assembled the full machine you can proceed to make the electrical connections.

  1. Prepare the cable for the power supply -- Photo
    Photo

  2. Prepare the motor connectors -- Photo
    Photo
    Photo

  3. Wire the machine according to the schematic -- Photo

  4. You can tidy up the connections by creating a cable harness as in the pictures -- Photo
    Photo
    Photo

  5. Guide the cables within the machine -- Photo

  6. Mount the cover for the electronics -- Photo
    Photo

You are done! Congratulations!! :-)

Photo

Please help other builders by fixing the wiki if you spot any mistake. Thanks! :-)

Credits

Original instructions by bq. (list of translation contributors)
CC-BY-SA
License: Attribution - Share Alike - Creative Commons (http://creativecommons.org/licenses/by-sa/4.0/)

Disclaimer

This hardware/software is provided "as is", and you use the hardware/software at your own risk. Under no circumstances shall any author be liable for direct, indirect, special, incidental, or consequential damages resulting from the use, misuse, or inability to use this hardware/software, even if the authors have been advised of the possibility of such damages.

Clone this wiki locally