Initial Set Up

So you have printed off your parts, followed the build guide, and powered up the SmartSpin2k for the first time. What's left?

On initial boot the SmartSpin2k will create its own Wifi network Access Point with the SSID of “SmartSpin2k”

The default password is password

The configuration page will automatically load on mobile. If you are not setting up on mobile, the configuration page can be found at http://SmartSpin2K.local/

Click on the Settings link

Enter your local WiFi network information with SSID and password.

• The default network information is shown in this photo. The MDNS name is a name you can use to reach the SmartSpin2K on your network. For instance if you entered DansBike into the MDNS field, you could go to http://DansBike.local to bring up the SmartSpin2K web page.

On the next reboot, if the latest update is not installed, and the Wifi Network is connected to the internet, the SmartSpin2k will automatically update. You will notice the blue LED will flash quickly while this process occurs. It should take about 3 minutes. Once the blue LED is flashing slowly it is ready to pair bluetooth sensors. Should your local WiFi network not provide internet access, the SmartSpin2k will attempt to connect for 10 seconds, followed by reverting to the default SSID of “SmartSpin2k”.