Electronic Warfare System
IF ANY EWAR SETTING IS USED, BASE OR AOE DAMAGE WILL NOT BE APPLIED!
- Emp - any block capable of being powered
- EnergySink - Power: Any power producer (SE also calls storage, like a battery, a power producer)
- Offense - Offense: Turrets, fixed weapons, or warheads
- Nav - Steering: Gyros and cockpits that you can control a ship from (this would exclude generic seats)
- Anchor - Thrust: Thrusters, obviously. Weapon-based thrusters like afterburners will not be included in this category
- JumpNull - Jumping: Jump Drives
- Dot - Damage over time
- AntiSmart - attracts Smart projectiles, like a decoy
- Tractor - pins target in place by applying forces
- Pull - pulls target by applying forces
- Push - pushes target by applying forces
-
Effect - Effects apply energy (from "strength") to their point of impact and grows as more hits come in. It would find the closest target block type to the point of impact and begin applying EWAR type up to the block integrity * max stacks. The effect would move to the next closest target block type until all are affected by EWAR type or the projectile runs out of energy. Normally effects are used for higher fire rate weapons/beams, to generate a cumulative EWAR type.
-
Field - Applies EWAR type to all blocks within a bubble. Field bubbles can grow in size over time to the specified radius. Additionally, fields reapply their EWAR type in pulses at a set rate, with a set percent chance to apply an effect. If a field isn't depletable, then it'll last until the projectile dies.
EMP & DOT EWAR Field Effects, require the target Shields to be offline, to begin effecting the target grid.
All Other EWAR Effects, ignore shielding, and begin affecting the target grid through shields.
An Exception, is EWAR Beams, which bypass shields regardless of type.
Every functional block has an EWAR resistance based on the blocks integrity. EWAR strength will deduct from that resistance (with damage modifiers applied). Only when the resistance reaches zero will the EWAR effect (except DOT, it applies regardless of block integrity) be applied.
The EWAR effect (except DOT) will be applied for the specified duration. You can control if the block can be hit multiple times with MaxStacks, and if the Duration of the EWAR effect should be cumulative (StackDuration = true)
If Depletable=true then the projectile's Health value determines how many times the effect can be applied. This does combine with MaxStacks, so if Depletable=true, Health=10, and MaxStacks=2 you could in theory apply an EWAR effect (including DOT) twice to 5 blocks.
-Minimum of 1 health, 0 will not work -EWAR radius is what captures the attention of missiles (not projectile size) -pulsing can be used as a rand % chance of capturing the attention of a missile -1 flare (at 1 health) will net 1 missile (missile must heave health/be targetable)
If you have suggestions or implementations, please raise them in the Discord! Thank you!
Please donate to DarkStar's Patreon!
